eBike Accessories
Motorcycle Parts- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
|
Item specifics
Product Description
KONNWEI KW208 Battery Tester Charging System Test Scan Tool 100-2000CCA Battery Analyzer Car Battery Diagnostic Tool PK KW600 What about KONNWEI KW208 Battery Tester : KONNWEI KW208 12V car battery tester is able to effectively analyze and read important car data such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status. It provides accurate results, calculates the cold cranking capability of the battery and the aging extent, allowing for a quicker, more precise car repairing.Test results display in both text and graphing, but the realtime battery voltage showing in a waveform.With an intelligent 2.4” Backlit and STM32 main chip, reading access is practical and rapid! Lifetime update service is supported by KONNWEI BTlink app.
KONNWEI KW208 Car Battery Tester Function : 1.System voltage 12 Volts and Voltage test in waveform; 2.Test Result Good, Recharge or Replace; 3.Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating;Internal resistance value (mΩ) and Life in percentage (%); 4.Cranking system and Charging system; 5.Record and re-play battery data, Life-time free update service; 6.Battery test, cranking test, charging test and other additional functions; 7.The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB，DIN and IEC are supported.
Cranking Test:
The cranking test is used to test and analyze the actual required cranking current and cranking voltage to check the starting motor works properly or not. The test result displays cranking time, voltage, and status. If the stating malfunction may cause an increased starting loaded torque; or rotor friction of the starting motor generates increasing friction of the starting motor itself.
Charging Test:
Charging test is used to check and analyze the charging system (generator, rectifier, rectifier diode, etc.) status, displays load voltage, unloaded voltage, ripple status, charging system status, thus to find out whether the output voltage of the generator is normal, the rectifier diode works properly or not, which avoids damaging the battery and shortening its life greatly due to overcharging or incomplete charging.
Support 8 Languages :
English, German, French, Dutch, Russian, Spanish, Italian ,Portuguese
Measure Standard:
1.CCA:100-2000
2.BCI:100-2000
3.CA:100-2000
4.MCA:100-2000
5.JIS:26A17-24SH52
6.DIN:100-1400
8.IEC:100-1400
7.EN:100-2000
8.SAE:100-2000
9.GB:100-1400
Package list:
1*KONNWEI KW208 Car battery tester
1*Mini USB cable
1*User’s Manual
1* Colorful Box
|
