Do you have these problems?

The OBD II system is designed to monitor emission control systems and key engine components by performing either continuous or periodic tests of specific components and vehicle conditions. When a problem is detected, the OBD II system turns on a warning lamp （IML）on the vehicle instrument.
Panel to alert the driver typically by the phrase of “check engine” or “service engine soon”. The system will also store important information about the detected malfunction so that a technician can accurately find and fix the problem. Here below three pieces of such valuable information.
1)Whether the malfunction Indicator light (IML) is commanded “on” or “off”;
2)Which, if any,Diagnostic Trouble Codes （DTC）are stored;
3)Readiness Monitor status.

KONNWEI kw320 functions:

1.Read engine or emission related fault codes error codes.
2. Erase and delete the fault code,
3. Turns off Check Engine Light (MIL), warning light, clears codes and resets monitors
4. Retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes
5. Easily determines the cause of the Check Engine Light (MIL), show definitions of the fault codes.
6. Displays monitor and I/M readiness status (emissions)
7. Reads live PCM data stream
8. Displays Live sensor data readings in both text mode and graph mode (1996 and newer vehicles)
9. Storage data stream, and playback, printing the stored sensor readings.
10. Views freeze frame data to analyze the real cause of engine failures
11. Displays live O2 oxygen sensor test data
12. Enhanced OBD2 Mode 6 On Board Monitoring Test Results for Specific Monitored Systems.
13. EVAP System test data
14. Battery Voltage real time monitoring.
15. Retrieves vehicle information (VIN code, CIN and CVN Number)
16. Built-in DTC look-up library and display definition.
17. Troubleshooter code tips guide technicians to the root cause of a trouble code faster, save diagnosis and repair time.

Why choose the KONNWEI KW320 OBD2 Scanner?

1.High Quality and High Resolution TFT colorful display helps you easily to find out the troubles of your car.
2.Bright color coded LEDs 2.8 inch screen and built-in speaker provide both visual and audible tone for readiness verification.
3. Patented appearance design & Key pad, unique patented One-Click I/M Readiness/DTC/VIN Key, it is the best partner for car repairing.
4. Featured 24-hr battery real-time monitoring during diagnostics, keep your car battery in healthy status.
5. Intergrated memory card allows storage of Trouble Codes, Live Data and freeze frame, Playback and review data when away from the vehicles.
6. Bright color coded LEDs indicators and built-in speaker provide both visual and audible tone for readiness verification
7. Universal scanners works on ALL 1996 and newer vehicles (OBDII & CAN) in USA, Most 2003 after EU (EOBD), 2008 after Asia car brand vehicles, suitable both diesel and gasoline 12V cars.

KONNWEI KW320 Support car models:

American (USA) car:
Compatible with Standard OBD2 Cars from 1996 to Now: For Chrysler, for Ford, for GM, for Jeep

European car:
Compatible with Standard OBD2 Cars from 2003 to Now: For Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Volvo, for VW, for Ford, for Jaguar

France Car after 2006:
for Citroen，for Fiat，for Renault，for Peugeot
Not Support for Renault Clio 2/Megane/Dacia Logan,

Asian car
Compatible with Standard OBD2 Cars from 2007 to Now: for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota

Chinese car:
Compatible with Standard OBD2 Cars from 2009 to Now: for BYD, for Chery, for Geely, for Great Wall, for Karry

Warning:
Not Support Russian Cars VAZ,UAZ,LADA ;
Not works with trucks For Ssangyong Actyon , from 2009 to 2017 years. For Ssangyong Korando , 2.0 TD Diesel , from 2013 to 2017 years.
For Ssangyong Kyron , 2.0 Diesel , from 2010 to 2017 years.
For Ssangyong Rexton , 2011 to 2017 years,
Not Support Opel Corsa c 2004 1.3 CDTI Nor Support vw golf 4 2002
Not support Citroen C4/C5 .
Not support Chevrolet cars ,
Not support Renault Logon/ megane
Not support skoda fabia .Skoda OCTAVIA .
NOTE:
Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.And this device only have OBD2 Functions,don't have Special Functions,Like ABS Reset,Airbag Reset... Please Leave us message in below format, we will reply you within 8 hours. for example : xx, 2005, 2.0cc, Diesel

Support Multiple languages:

English,French German, Spanish,Russain, Portuguese,Polish, Italian, Dutch

How to use it ?

Please plug device into car's 16 pin OBD port, the device will be powered on and follow the on-screen instruction to go!

Software Display:

Package List

*1 KW310 OBD2 scanner
*1 User manual
*1 Carton package