Konnwei KW902 OBD 2 ELM327 V1.5 pic18f25k80 OBD2 Scanner ELM 327 Diagnostic Tool Support Android/pc

Note:
1.There are 5 colors kw902 elm327 bluetooth.
2. ELM327 Will work with 12 V gasoline and diesel vehicles .
Not support 24 v diesel /trucks .regards.
3. Compatible with 12V 16 Pin vehicles Requires OBD II protocols.
4. Support System:
Bluetooth version -----supports android phone/PC----connect via bluetooth
（can not work with IOS Iphone ）
5.For checking if vehicle compliant with OBD II----Please pop the hood and look for a sticker named -VEHICLE EMISSION CONTORL INFORMATION-.

FAQ Before Orders (Please kindly read before)

Q1: What is the version of the ELM327?
A1: This is the real V1.5 High Quality version, original Microchip PIC18F25K80, frequency 4mhz of crystal oscillator there, support commands ATAL and ATPPS, Support all OBD2 Vehicles.

Q2: What is difference between V1.5 and V2.1 ? and How can I check it ?
A2: Our newest ELM327 is 100% V1.5, which is support full protocols version, especially J1850 PWM & J1850 VPW.

Q3: Does this adapter support the diesel cars or trucks ? Is this working with IOS?
A3: ELM327 does support the diesel vehicles or trucks, and this ELM327 is bluetooth version for android system cellphones only. If you need the IOS version, you can contact us for a WIFI version.

Q4: How do i know if my car is working with the ELM327 or not ?
A4: This ELM327 bluetooth adapter is working for all OBD-II Compliant vehicles.
The OBDII compliant vehicles referernce as below:

1996 or newer model year vehicle made in the United States
Fit for C-hrysler ,Fit for F-rd ,Fit for G-M ,Fit for Jeep

2004 or newer model year vehicle made in the European Union
Fit for A-lfa Ro-meo, Fit for S-AAB, Fit for A-cura, Fit for Oand pel, Fit for A-udi, Fit for S-eat, Fit for P-eugeot ,Fit for R-e-nault after 2009 year, doesn't support Clio 2
Fit for B-entley ,Fit for S-koda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu ,Fit for Land Rover
Fit for BM and W ,Fit for V-auxhall ,Fit for -Citroen, Fit for V-olvo ,Fit for Fi-at ,Fit for V-W ,Fit for F-ord ,Fit for J-aguar

2008 or newer model year vehicle made in the Asian car makes
Fit for KIA , Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda
Fit for Nissan, Fit for Subaru , Fit for Suzuki, Fit for Toyota

Warm Notice for Special car models:
For Lada/ VAZ/ UAZ car makes, please don't purchase If your car is before 2006.
For Ss-angyong car makes, please don't purchase If your car is before 2008.
For R-e-n-ault - D-acia - Logan car model, please don't purchase If your car is before 2009.

Q5: What functions that I can do with the ELM327 ?
A5: The device is a small adapter that plugged into the vehicle OBD-connector. On Bluetooth, it connects to any computer, tablet or smartphone( android), With associated diagnostic procedures . Doing these simple operations, you will be able:
* Read, erase and display code descriptions problems - both standard and special manufacturers.
* Measure the fuel consumption.
* Display real-time operating performance of the car, such as momentum, vehicle speed, oil pressure, coolant temperature, engine load, intake manifold pressure, throttle position, the values of oxygen sensors, air intake
temperature, and more.
* Turn off the MIL (signal Check Engine).
* Download data to external media in a variety of formats for later printing.
* Record various parameters, display graphics in real time, and more.

Q6: What is the function of the ON/OFF button ?
A6: The blue ON/OFF button is for reset/ wake up the device, because this new designed ELM327 is built with auto-sleep mode, after 30 min without communication, it will go in sleep-mode. The Sleep mode consumption of our scanner is only 10MA, so there is no need to worry about leaving it in car over night with plugging in.

Q7: How to connect the Universal Bluetooth V1.5 ELM327 :
1. Clear your bluetooth connection history, find the ELM327 device , and connect it, password is : 1234 or 0000
2. Open the software , and set it as the picture steps :
3. Click these two places of the picture, and wait for 30 seconds , it will connect successful .

ELM327 V1.5 (Bluetooth )Features:

* Small size, compact structure. Plug and never unplug
* Stable wireless connection via bluetooth 3.0.
* No wires or batteries (adapter is powered by the 12V Vehicles battery)
* 30 Minutes without communication, it will automatically go to sleep mode.
* Ultra low cumsumption in sleep-mode, less than 10MA
* Supports ALL OBDII protocols, widest coverages
* The adapter uses the fast communication mode and most reliable PIC18F25K80 chips, up to 30PID/S.
* True ON-OFF button, you can press button to turn off the elm if not in use.

ELM327 V1.5 (Bluetooth) Function List:

1.Read diagnostic trouble codes, both generic and manufacturer specific
2.Clear trouble codes and turn off the MIL ("Check Engine" light)
3.Display current sensor data, including:
4.Engine RPM
5.Calculated Load Value
6.Coolant Temperature
7.Fuel System Status
8.Vehicle Speed
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
12.Timing Advance
13.Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages/associated short term fuel trims
17.Fuel System status
18.Fuel Pressure

NOTE:

Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is spercial design, so it may not compatible with some cars which do not support OBD2 protocol. If you're not sure, ask seller anytime!

Software Display

HOW To connect the phone and use the ELM327 ?

A: On android phone : 1. Open the "setting" of your android,and search bluetoothfrom ELM327:OBDll, then input password 1234. 2. Open your Torque--etting---OBD2 Adapter Settins---Connection Type---Bluetooth---back---Choose Bluetooth Device---OBDII[AA:BB:CC:11:22:33].

Pictures: