-Suitable for all kinds of vehicle modification, the use of stepper motor drive pointer, accurate display engine RPM, and with the LCD display clear display hour, with instructions of high precision, repeatability and versatility, reliability and stability, drive And control is relatively simple and so on

-Tachometer using stepper motor drive pointer, accurate display of the engine RPM, and with the LCD display clear display hour

-Name: Tachometer

-Materials: stainless steel+nickel-plated plastic

-Operating Voltage: 12V/24V

-Connection: Red-Battery(+9-32VDC) Blue-Battery(-) Black-Signal Orange/Yellow-Backlight(+9-32VDC)

-Indicating Range: 0-3000RPM 0-4000RPM 0-6000RPM 0-8000RPM

-Input Signal: Pulse Signal from tacho sensor, engine, alternator, ignition coil, crankshaft sensor, etc.

-Adjustable speed ratio: 0.5-250.0/1.0-10.0

-Protection Class: IP67, can work underwater 1 meter position

1 x Tachometer   1 x Cable   1 x Installation Instructions

Be used for gear rotation speed measurement

Combining the advantages of stable signal, wide range of operating temperature, small size, simple assembly, etc.

It covers a wide range of measurement, and it is able tomeasure the zero rotation speed

-M16*1.5 (2-wires)

Operating temperature: -40 ~85℃

Output signal: sine wave

Signal duty factor: 47±5%

Inductance distance: less than 1mm

Tooth module: 2~6

Connecting way: two wires

Protection rank: IP65

Length: L=100MM L1=80MM

-M16*1.5/M18*1.5 Holzer Tacho (3-wires)

Operating temperature: -40 ~85℃

Output signal: square wave

Inductance distance: less than 2mm

Operating voltage: 8~32V with polarity protection

Connecting way: three wires

Protection rank: IP65

Length: L=80MM L1=70 / L=80MM L1=60MM

-M16*1.5   M18*1.5

Operating Temperature: -40  to 85℃

Output Signal: Sine Wave

Signal Duty Factor: 47±5%

Inductance Distance: Less than 1mm

Tooth Module: 2~6

Connecting Way: Two Terminals connection