LAUNCH CR629 OBD2 Scanner Car Code Reader with Active Tests, ABS & SRS Diagnoses, Oil/SAS/BMS Reset, Full OBD2 Functions for DIYers - Black

LAUNCH Creader CR629 is an Enhanced OBD2 scanner designed for Engine, ABS, and SRS monitoring. You can troubleshoot emission-related issues via the full obd2 functions. Built with top-level Actives tests and ABS & SRS diagnoses, this scanner monitors the running condition of ABS and SRS, to better keep your car in peak performance. If you want an easy-to-use and feature-rich car scanner, LAUNCH CR629 equipped with a 3.5-in display is the first tool you need to have.

Multilingual Support:

English, French, German, Spanish, Portuguese, Russian, Japanese, and Italian.

Update & Warranty

Lifetime Free Update

1 Year Warranty

Active Tests Supported

Save Diagnostic Time – Active Tests
√ Principle of Active Tests
Active tests, also named as actuator tests and bi-directional control, request information or commands a module from/to powertrain control module to perform specific tests and functions.

√ Getting Down to Diagnosis
Fully understanding the nature of the problem. With this scanner, you can command the vehicle through the active tests and take easy and accurate readings of what’s wrong with your car’s Anti-lock Braking System and Supplemental Restraint System. Just send commands to your car to test things like fuel pump on/off, or to retract an electronic brake.

Fully Monitor Status of ABS & SRS

√ Read Version Info – Identify the specific information for the tested control unit, including unit type, version numbers, and other specifications.

√ Read / Clear DTCs – Read the diagnostic trouble codes to know the cause of the warning light and the vehicle faults. After repairs, you can clear the DTCs to turn off the ABS or SRS indicator light.

√ Read Live Data – Retrieve the real-time data stream including coolant temperature, MAP value, TPS value, vehicle speed, mass air flow, ambient temperature, engine rpm, etc. for deep analysis.

√ Active Tests – Send information to, and receives information from, vehicle control modules, to test vehicle devices and know if they are running properly.

Oil Reset & SAS Reset & BMS service for Fast Maintenance

√ Perform Oil Reset after Oil Change
Oil change and reset is necessary, usually about once every 300miles. Changing new, fresh, clean oil for your car is the most direct way to ensure your car runs smoothly and eventually. And using the LAUNCH CR629 to reset oil light is essential for avoiding missing the next oil change.

√ Recalibrate SAS After an Alignment
It is important that whenever there is a change to the steering system that the steering wheel angle sensor is reset or recalibrated. This hand-held car scanner can do the calibration so the senor can offer accurate information connecting the steering wheel with the wheels, keeping the normal running of the ESC (Electronic Stability Control) module also your car.

√ BMS service
BMS service helps clear the unhealthy status memories of replaced battery in ECU and helps ECU get the knowledge of new battery to record its status

Full OBD2 Functions are Ready for Engine Checking

CR629 car scanner supports Full OBD2 Functions include Read/Erase Codes, Live Data, Freeze Frame Data, I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Component Test, Vehicle Information Retrieval. What can these functions do for you?

√ Turn the MIL off – After you get the diagnostic trouble codes erased, the check engine light can be off automatically

√ Pass the Smog Test – Check your car’s I/M Readiness status before the emission inspection. Take a well-running vehicle to pass the emission inspection successfully

√ Locate Emission Problems – Full Obd2 functions are significant for figuring out what the root cause is. The diagnostic information is comprehensive, reliable, accurate, and valuable for reference.

Solve over 41 Vehicles’ Problems

LAUNCH CR629 is compatible with more than 41 different vehicles and the coverage can be expanded as you frequently update your CR629 to the latest version.

√ Europe:
Audi, Benz, BMW, Citroen, Dacia, Fiat, Jaguar, Land Rover, Mini, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Sprinter, Volvo, VW, Europe Ford, Alfa Romeo, Vauxhall.

√ Asia:
Acura, Daewoo, Honda, Hyundai, Infiniti, JP Isuzu, Kia, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota.

√ America:
Chrysler, GM, USA Ford.

√ Australia:
Holden, Australia Ford.

Add-on Features Makes Diagnosis Easier

√ 3 Hot Keys – Read the DTCs / Erase the DTCs / View I/M Readiness Status with only one click.

√ DTC Lookup – Input the diagnostic trouble code and get the code’s meaning immediately.

√ PC Printing – Connect CR629 with a computer and print the valuable diagnostic information out.

√ Longtime Free Update – No extra charges needed. Through the update, get the latest version of CR629 for better use.

√ Graphic Data Stream – Convert the format of the data stream from parameters to the graph for more intuitive reading and easier understanding.

Specifications：

Display: LCD 3.5-Inch, 320*480
Operating Voltage: 9~18V
Storage Temperature: -20℃~70℃（-4℉~158℉）
Working Temperature: -10℃~50℃（14℉~122℉）
Dimension: 215*114.1*34.5 mm（8.46*4.49*1.36 inch）
Length: 1185 mm (46.65 inch)
Net Weight: 535g (18.87oz)