LAUNCH X431 CR3001 Car Professional OBDII Scanner Check Engine Light for OBD2 Vehicles , Read and Delete Fault Codes , Reset Check Engine Light, Pass Emission Test Smoothly, Multi-Language , Free Update Online

Warm Tip : LAUNCH CR3001 only supports Engine system and cannot support ABS SRS Airbag system. If you need equipment that supports these systems, please contact the seller to provide new products

and LAUNCH CR3001 equipment is directly connected to the car's OBD2 diagnostic socket to obtain power for diagnosis, just plug in Ready to use, no need to recharge

What is Wrong with the Car ?

Why Choose LAUNCH CR3001, what are our advantages?

LAUNCH CR3001 Support Multi-Language

The CR3001 operating system can quickly be changed into English, French, Russian, Spanish, German, Italian and Portuguese.

LAUNCH CR3001 Support Car Models

American Cars

Compatible with Standard OBD2 Cars from 2000 to Now:
Chrysler, Ford, GM, Jeep, Lincoln, Buick, Cadillac, Chevrolet, Dodge, HM, ect...

European car

Compatible with Standard OBD2 Cars from 2003 to Now:
Mercedes Benz, Smart, Sprinter, BMW, Volkswagen, Skoda, Audi, Opel, Lamborghini, Porsche, Maybach, Ford, Land Rover, Jaguar, Aston Martin, Bentley, Rolls-Royce, Rover, Mini, Vauxhall, DR, Ferrari, Fiat, Abarth, Lancia, Alfa Romeo, Maserati, Bugatti, Peugeot, Citroen, Renault, Saab, Volvo, GM, GMSA, Dacia ,Seat, ect ...

Japanese / Korean car list

Compatible with Standard OBD2 Cars from 2008-now:
Honda, Acura, Toyota, Scion, Lexus, Mazda, Nissan, Infiniti, Isuzu, Daihatsu, Suzuki, Mitsubishi, Subaru, Samsung, Daewoo, Hyundai , Kia, ect ...

Chinese car list

Compatible with Standard OBD2 Cars from 2014 -now:
Great Wall, Huachen, Geely, DF Honda ,Lifan, ect ...

Warning Notice
1.Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.

2.Not Support Russian Cars before 2012, VAZ,UAZ,LADA ; Not works with 24V trucks
for Renault, SsangYong, please contact us before purchasing.

OBD2 Check--Make a Better Detection for Car Engine System!

CR3001 is with complete OBDII/EOBD diagnostic functions and meets protocols such as IS09141-2, ISO14230-4, SAEJ1850, and IS015765-4.
This is specifically designed for the engine called the "car heart". It is necessary to keep an eye on the engine status to ensure the efficient operation of the engine to ensure your travel safety. In addition, it can also be used before you send the car to the emission test. great for daily repair work. The table below describes the purpose of each mode of operation:

1. Read Code

Read DTCs (Diagnostic Trouble Codes) to locate the issues

2. Erase Code

Clear DTCs to turn off the Check Engine Light after certain repairs

3.Live Data

Display real-time data of the emission-related Engine system

4. Freeze Frame

View the data recorded when an emission-related fault occurs

5. I/M readiness

Read I/M readiness status to have a vehicle inspected for state emissions compliance

6. O2 Sensor Test

Read the result of the O2 sensor test to find out the O2 sensor malfunctions;

7. On-Board Monitor Test

Retrieve the test results for emission-related powertrain systems and components that are not continuously monitored to figure out on-board monitor issues

8. EVAP System

Allow you to initiate a leak test for the vehicle’s EVAP system.

9. Vehicle Information

Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10. Component Test

Certain vehicle components can be actuated by commands sent from the scanner to test their operability

DTC Lookup

enables you to view the detailed definition of the retrieved DTC

Reset Check Engine Light

Turn off Check Engine Light, Find out what s wrong with your car and perhaps fix it. Save money and time.

Pass Emission Test Smoothly

With this scan tool, you don’t have to drive around endlessly, continuously coming back to the repair shop for the retest.
You can do a quick check of the vehicle, to determine if it is ready to pass the emission test.

Free Update LAUNCH CR3001 Online

If the product displays a white screen or cannot support your car, you can solve it by upgrading

Support update system :compatible with Windows XP, Windows 7, Windows 8 & Windows 10

Update Videos

How to use CR3001 to Diagnostic your car?

Please turn on car engine----Plug into Car----Open cr3001 manual to do diagnose .

FAQ

Here we list some frequently asked questions and answers related to this tool.

1. Question: Does LAUNCH CR3001 support diagnosis of ABS and SRS system??

Answer: NO, it only supports engine systems

2. Question: System halts when reading data stream. What is the reason?

Answer: It may be caused by a slackened connector. Please turn off the tool, firmly connect the connector, and switch it on again.

3. Question: Screen of main unit flashes at engine ignition start.

Answer: Caused by electromagnetic disturbing, and this is normal phenomenon.

4. Question: There is no response when communicating with on-board computer.

Answer: Please confirm the proper voltage of power supply and check if the throttle has been closed, the transmission is in the neutral position, and the water is in proper temperature.

5. Question: Why are there so many fault codes?

Answer: Usually, it’s caused by poor connection or fault circuit grounding.

LAUNCH CR3001 Packing List

1 x Launch CR3001
1 X USB cable
1 X User Maunal