Note:

1. This product cannot start the car, and can only be installed in a circuit with a control current less than 40A. It can be used for beryllium copper motorcycles. If the engine displacement is greater than 400CC, it cannot be used and is easy to burn out. It is recommended that it be less than or equal to 250CC；

2. This product consumes 0.06A when it is powered on, and does not consume power after power off. If the car is not used for more than 2 days, when parking, you need to use the remote control to power off, otherwise it will accelerate the battery power consumption;

3. Install and use when the battery is fully charged, and do not install and use at a loss of power. If the voltage is lower than 11V, it can't work normally, you need to charge the battery before use. If you use the engine to charge, remember to turn on the power with the remote control after the engine is started, otherwise the transmitter cannot charge the battery when the power is off.

Product parameters:

Product name: Motorcycle battery power-off protector
Applicable voltage: 8-16V
Applicable current: 0-50A
Working current: 0.12A
Current after power off: 0.002A
Working temperature: -40℃-90℃
Product function description: power-off switch, which can be installed on the battery to prevent battery leakage

Wiring diagram

A: Connect the output positive terminal, do not touch the negative terminal
B: Connect the positive electrode of the battery, do not connect other wires to the positive electrode of the battery
C: Connect the battery negative

Installation instructions:

Take the installation of a motorcycle as an example: the first step is to disconnect the positive wire of the battery and connect it to A;
the second step is to connect B to the positive pole of the battery;
the third step is to connect C to the negative pole of the battery.
(Note: Neither A nor B can touch the negative electrode, and A and B need to be separated)

Instructions for use:

Press the button B after parking. The motorcycle will be completely powered off to prevent the battery from running off.
Before starting motorcycle, press the key A to restore.

Real shot show