Description
Customer Reviews(0)

Item specifics

Origin CN(Origin)
OE NO ALL
Place of Origin zhejiang China
Brand Name RC
Certification ISO9001
Car Model Petrol car
Product Name MP48 ecu
Connection 48Pin
Diagnostics connector RS232 or USB
Car Make lpg car
car make 4 cylinder car
ecu reach48
Application autogas

Product Description

modname=ckeditorProduct feature:

Product Name	MP48 ecu
Working Voltage	10-14v DC
System Working Current	<200 mA
Car make	4 cylinder car
Nozzle Breakover Current	< 1.5 abe
Voltage	12V
Quality	High-Quality MP48 ecu

Electronic control unit for car

1. Applying to 3-cylinders, 4-cylinders, 6-cylinders, 8-cylinders engine2. Have the MAP sensor, combustion efficiency is higher3. Circuit optimization, stronger anti-interference ability4. Automotive connectors, long time life5. Use advanced technology, to ensure accurate air-fuel ratio6. Equipped with multi-function switch

AEB MP48 ECU (48 pin plug) is one of the most popular and non problematic autogas controller. Has been designed to enable conversions of 2, 3 and 4 cylinder engines equipped with sequential petrol injection. The controller offers high efficiency, but is at the same time compact in size and easy to fit. Box contain: KING MP48 ECU ControllerAEB MP01 Map SensorWiring harnessSwitchFuse holder with fuse P48 is the evolution of the well –known, high-performances and reliable AEB2001PC ECU.MP48 ECU is designed for 3-4 cylinders multipoint timed sequential injection engines. While running on gas, MP48 considers the petrol injection time and the pressure on the rail to calculate the equivalent amount of gas to be injected in the intake manifold to replicate the performance of the engine running on petrol MP48 is equipped with a diagnosis system on every Gas component, whose status can be monitored by the calibration software during the installation of the system and at any moment of the engine lifetime. This feature may preventmalfunctioning problems and makes technical interventions easier.In addition, the calibration tool offers guided procedures for simplifying the system installation and setting.Thanks to the combination of MP48 and PTMAP sensor, the installation steps are further simplified and the costs highly reduced.MP48’s compact case favors an easy installation of the ECU inside the engine compartment. MP48 is equipped with a 48-PIN new generation automotive connector, with an IP high protection degree (6K9K) against water infiltrations and an easy leverage system for cable connection/disconnection. The cable is characterized by a security system on the connector that prevents accidental release of the wiring. Tech. SpecificationsSupply voltage: Vbatt=10÷16VOperating temperature: -40÷110°CCurrent absorption with the actuators disabled: Imax ≤0.5ACurrent absorption in standby mode: Istandby ≤0.5AActuators managed: up to 4 injectors with the following characteristics Imax=6, Vbatt,max=16V[Pmax=25W, Imax=2A (power and maximum current for each output with two outputs enabled)Pmax=50W, Imax=4A (power and maximum current with just one output enabled)]Sensors managed: PT MAP sensor: 463059000 (shuttle Ø10), 463500000 (shuttle Ø12), 463505000 (shuttle Ø14)MAP sensor: the car’s original sensorGas temperature sensor: AEB type sensor (4.7kOhm - included in PT MAP sensor), 2.2KOhm sensorWater temperature sensor: 4K7, OriginalGas level sensor: AEB, o-90Ω, non standard, non standard invertedOxygen sensor: 0-1V, 0-5V, 5-0V, 0.8-1.6VManagement of AEB119B type switch