MUCAR CS4 OBD2 Scanner---The Most Professional Code Reader for ABS SRS ECM TCM with OIL+EPB+SAS+TPMS+Throttle Position Resets Lifetime Free Update

The MUCAR CS4 product is a new generation of high-end DIY car diagnostic tools based on the Android system, which can realize free upgrades of the diagnostic software online for life. Its main functions include not only OBD/EOBD standard protocol diagnosis, but more importantly, it has professional vehicle diagnosis software and maintenance software, which can comprehensively diagnose the ABS/SRS/ECM/TCM system of more than 1,000 vehicles of more than 126 models and brands. Support 5 reset functions,Oil/EPB/SAS/TPMS/Throttle Position Resets Lifetime Free for All Cars.

1. MUCAR CS4 is an upgraded brand new version, which runs faster and has better materials.

2.The 5-inch touch high-definition large screen, the memory is 16G.Plug and play, no need to charge and activate.

3.MUCAR CS4 can diagnose ABS/SRS/ECM/TCM 4 car systems for free for life, ead and erase code, live data stream, stores and playbacks data stream, helps to quick analysis and diagnosis, and turning off the system warning lights.

4. MUCAR CS4 support Oil/EPB/SAS/TPMS/Throttle Position Resets Lifetime Free for All Cars.

5. Complete OBD2 function, read fault code, delete code, read data stream, etc.

6. One-click wifi free update for life, more than 126+ car brands, 10000+ models, upgrade new models to 2022, this scanning tool is suitable for most OBDII compatible vehicles in 1996 and newer.

7.2 in 1 diagnostic tool, health report recording, playback and printing, you can use the data cable connection to send the diagnostic report to the computer for printing. Support screen recording and screenshot function.

8. Online maintenance resources: operating skills, DTC help, automotive technical manuals, maintenance cases and operating videos. Allows you to grasp and understand car breakdown problems faster.

9.More Stronger and More Resistant to Fall. The anti-slip handle design and anti-fall shell greatly extend the lifetime of the MUCAR CS4 automotive scanner.

And more

4 System Diagnosis(ABS/SRS/ECM/TCM) Lifetime-Free Update - Detective Most of the Problems Your Car Might Meet

This car obd2 scanner is capable of reading and clearing trouble codes of ABS/SRS/ECM/TCM Engine.

Diagnose ECM (Check Engine) System:

Quickly determine the cause of the Engine System, and turn off the warning light. It also retrieves current, permanent, and pending codes in the vehicle engine system, What's more, it also shows critical OBD II standard extended data, such as fuel, emissions data, and other real-time manufacturer-specific parameters in the engine system for making sure it works correctly and safely.

Diagnose ABS (Anti-lock Braking) System:

Read and clear the error code in the ABS and turn off the warning light. It retrieves ABS codes to make braking more smooth, consistent and safe. It also performs live data streams in the ABS that allow the user to monitor and diagnose critical ABS systems to ensure that repairs to this critical system are effective and complete.

Diagnose SRS (Airbag) System:

Safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.

Diagnose TCM(Auto Transmission) System:

AT(automatic transmission) system is one of the powertrain control modules,but some issues like un-working electronic accessories and broken transmission computer will keep your transmission light flashing. It's hard to locate the accurate error within limited time. Fortunately, this car error code reader transmission scanner will assist you to have a fast scanning of your vehicle and read the fault code easily, shutting down the warning light within minutes when you finish the repair.

MUCAR CS4 support 5 reset functions,Oil/EPB/SAS/TPMS/Throttle Position Resets Lifetime Free for All Cars

• Oil Lamp Reset Service:The lightening of the car maintenance light indicates that the vehicle needs maintenance. Reset the mileage or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle.

• EPB Electronic Park Brake Reset:When the brake pad reaches a certain thickness, the brake pad induction wire will be worn. At this time, the wire will send a signal induction wire to the on-board computer to prompt the replacement of the brake pad. After replacing the brake pad, the brake pad needs to be reset, otherwise, the car will continue to alarm. Situations when the reset is required:

a) After the brake pad is replaced and when brake pad wears sensors;

b) When the brake pad indicator lightens;

c) After the brake pad sensor circuit is repaired;

d) After the servo motor is replaced.

• SAS Steering Angel Sensor Reset:Find the position where the car keeps driving straight. With this position as a reference,the ECU can calculate the accurate angle when the car turns left and right. Generally, after replacing the steering angle position sensor, replacing the mechanical parts of the steering system (such as steering gear, steering column, tie rod ball head, steering knuckle), completing the four-wheel positioning, body repair, etc., it is required to reset the steering angle to zero.

• TPMS Tire Pressure Monitoring System Reset:When the car tire pressure fault indicator light is on, this function is to reset the tire pressure and turn off the tire pressure fault indicator. If the tire pressure is too low or leaks, replace or install tire pressure monitoring equipment, and replace the tire. When the vehicle with a damaged tire pressure sensor and tire pressure monitoring function has rotated its tires, the tire pressure reset must be carried out after maintenance.

• Throttle Body Reset:Throttle matching is to utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state. By doing these, the movement of the throttle (or idle motor) can be more accurately controlled, thus adjust the intake volume. Situations when throttle matching is needed:

a) After replacing the electronic control unit, the relevant characteristics of the throttle operation have not been stored in the electronic control unit.

b) After the electric control unit is powered off, the memory of the electric control unit’s memory is lost.

c) After replacing the throttle assembly, you need to match the throttle.

d) After replacing or disassembling the intake port, the controlling of the idle speed by the coordination between the electronic control unit and the throttle body is affected.

e) Although the characteristics of the idle throttle potentiometer have not changed, the intake volume has changed and the idle control characteristics have changed at the same throttle openings

MUCAR CS4 OB2 Scanner Supports Full OBD2 Test Modes

Read Codes: Knows what and where the problem is according to the DTC and its definition.

Clear Codes: Clear/Erases the DTCs and turns off the warning lights after code reading and certain repairs.

Live Data: Show the information of continuous data stream from vehicle in live graphic display.

Smog Check: You can check if the various emission-related parts or systems on the vehicle are operating properly and make sure the monitors are ready for a smog test.

Freeze Frame: Request freeze frame information.

O2 Sensor Test: Show the last results of O2 sensor test in graphic display for troubleshooting.

Evap Test: Fuel Tank System (Carbon canister test), special control mode requests control of EVAP test.

On-board Monitor Test: Read the results of on-board diagnostic monitoring tests for specific components/systems.

DTC Code: Built-in DTC lookup library with cause analysis

Vehicle Information: Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

One-Click WIFI Free Update Lifetime

1. Turn on the MUCAR CS4 car scanner
2. Connect to WIFI
3. Click the upgrade button on the home page to achieve one-click upgrade

Support 13 Languages

English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Hungarian, Arabic, Greek, Slovak

MUCAR CS4 OBD2 Scanner has a wide vehicle coverage and is compatible with 90% of all car models from the US, Europe, and Asia.

- America:

Chrysler, GM, USAFord

- Europe:

AstonMartin, Benz, Sprinter, BMW, Ferrari, Fiat, LandRover, Maserati, Opel, Peugeot, Porsche, Lancia, LT3, Maybach, Mini, Seat, Skoda, Vauxhall, Volkswagen CV, Renault, Saab, Smart, Volvo, Volkswagen, Abarth, Alfa, Audi, Bentley, Bugatti, Citroen, Dacia, Jaguar, Lambor Ghini

- Asia:

Acura, Daewoo, Daihatsu, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Maruti Suzuki, Mazda, Mitsubishi, Nissan, SsangYong, Subaru, Suzuki, Toyota, GTR, Scion

NOTE: NOT all functions are compatible with all vehicles. Please ask seller before purchasing.

Reading Codes

Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset

Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream

Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status

Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream

Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

How to Register/Update MUCAR CS4?

1.Initial Use
2.Turn on the Machine
3.Language Setting
4.Connect WIFI
5.Choose Time Zone
6.User Agreement
7.Create an Account
8.Typing in Business Information

Product Parameters:

CPU:MT6580 CORTEX-A7 1.3GHz/4Core
Memory:1GB DDR3/16GB EMMC
Display:5 Inch/ 480*854 MIPI LCD Display Screen
TP:GT911 GFF
WIFI:802.11b/g/n 2.4GHz
USB:TYPE C*1
TF Card:Support SDHC High Speed Card
Battery:3.7V / 600mAH Lithium Polymer
Power Input:OBD 12V input or TYPE C 5V input

Packing List:

1*MUCAR CS4 Host
1*Manual
1*Charging cable
1*power adapter