Important:

--If yours is e- bike, When purchasing, please leave a message: e-bike
--If yours is e- scoter, When purchasing, please leave a message about your scooter model in the order!

-----Conducive to fast delivery

About the electric bikes?

Applicable to most bicycle brakes, if your's is a e-bicycle, The front and rear brakes are on the left side. be sure to make the note when you buy it : my is e-bike. This is conducive to we can accurate and Fast delivery.

About the electric scooters?

The brake kit is mainly compatible with KUGOO G-Booster and the same mounting direction and Angle (see the details below). Be sure to mark the model of your e-scooter when you buy it, so that we can deliver the scooter accurately and quickly.
---（Not suitable for scooter installation on the right side of rear wheel）
---(Some scooters need to be installed with gaskets, we do not provide this kind of gaskets, please solve by yourself)

For electric scooters model?

In addition to being suitable for E-bike, it is also suitable for the following models of scooters:
KUGOO G-Booster / KUGOO ES3 / dualtron ultra / dualtron eagle pro / Ultron t11 / FLJT113 / Speedway 5 /vmax r55 / ultron t108 / IO Hawk Legend (base: Kaabo Mantis) /speedway 4 / blade 10 / Minimotors /Kaabo Mantis 10 ....

About other electric scooter models?

If your e-scooter is other model, please do not directly buy, contact the customer service in advance, and provide the scooter model and photo, we will recommend you the appropriate purchase link. Otherwise, we will not be responsible for your order. If you bought the wrong brake kits because of the buyer, please contact the customer service to solve it first. Don't rush to initiate a dispute, thank you.

About the brake lever?

Because the brake lever and the tubing are separated, so you can install the brake lever according to the control direction you want : right front left rear, left front right rear, it can be.

About oil tubing?

The front brake length is 1.25m, the rear brake length is 2.2m

About broken wire interface?

The default wire is a waterproof interface===JULET 2 pin connector (male) . The default is 30 cm.

If you also need to replace the （female） JULET 2 pin connector on the scooter, please contact customer service

About calipers?

The caliper contains original brake pads. If you want to replace the brake pads, it is recommended to buy NUTT cooling brake pads with a radiator for longer life ↓↓↓↓

Package details:

As shown in the color purchase pictures, including all screws and wrenches in the picture

The direction of the brake lever and caliper;
such as:left hand rear brake,left hand front brake ..
Right Front Brake
Left Rear Brake
(Adjustable Right Rear)
(Adjustable Left Front)

Not all front wheel brakes of scooters are suitable, please refer to the following conditions. If your scooter is not the following type, and you do not consult us before purchasing, we will not be responsible for your order.

Compatible model

⬆ Model can refer to ：KUGOO G- booster

Note: the front and rear brakes are on the left ⬇⬇

⬆ Model can refer to ：WS-MINI 500W

Model : E-Bike

How to Choice Suitable Brake Kit ?

Determine the position where the caliper is installed；
Such as:Left,Right,Front wheel,Rear wheel...

SIZE

--- Oil Tubing length can be customized according to customer requirements

Product Analysis

Product Analysis

1. Banjo connector, support rotate 270°
2,Double piston
3,Rotatable removal, oil seal cap

--- Aluminum alloy stamping handle
--- high precision die-casting body edges and
corners are precision grinding and polishing

Power off sensor control

Sealed oil Cylinder construction

--- Increase the oil Cylinder structure, large amount
of oil and large thrust.
--- More circulating oil, better heat resistance and
stable performance

Brake handle adjusting screw

* It can be adjusted according to personal comfort level

Rotatable removal, oil seal cap

--- Unless necessary, do not remove it to prevent oil leakage.

Caliper Description

--- Open system, double piston full aluminum alloy forging caliper body.
--- Brake pad automatic return function, brake pad easy to replace.
--- No corrosive mineral brake oil, good braking performance at high temperature

Product Display

F203/R180

⬆ High-performance metals ceramic composite material
--- The Front B pillar is installed 203mm
The rear B pillar is installed 180mm

F180/R160

⬆ High-performance metals ceramic composite material
--- The front B pillar is installed 180mm
--- The rear B pillar is installed 160mm

F160/R140

⬆ High-performance metals ceramic composite material
--- The front B pillar is installed 160mm
--- The rear B pillar is installed 140mm

NUTT Cooling brake pads

☝ The 140mm 160mm and 180mm adapters have the same mounting hole distance

Drake Rotor is optional

*Tips: it is recommended to replace the oil brake together with the rotor when replacing the brake