OBD2 Scanner KONNWEI KW808 Automotive Diagnostic Tool OBD 2 Auto Scanner Engine Code Reader support CAN J1850

Item Description

This scanner supports all nine OBDII test modes on all OBDII compliant vehicles to enable technicians to accurately diagnose even the toughest problems. Sophisticated yet easy to use, this ergonomic scan tool make your vehicle service experience much more pleasant!
- There's no need to install any software, all you received are ready to use.

Features:

1. Reads & clears generic OBD II trouble codes (including pending codes)
2. Turns off check engine light (MIL)
3. Displays Generic Codes P0, P2, P3, U0 and Manufacturer Specific Codes P1, P3, and U1
4. Displays OBD2 monitor and I/M readiness Status
5. Detects OBD-II Freeze Frame Information
6. Reads live PCM data stream
7. Displays live O2 sensor test data
8. Performs Modules Present Test
9. Supports CAN (Controller Area Network) and all other current OBD-II protocols
10. Built-in OBD-II DTC lookup library
11. State Emissions Check (OBD2)
12. Retrieves Vehicle information (VIN, CID and CVN)
13. Determines the malfunction indicator lamp (MIL) status
14. Code definitions displayed on unit screen
15. Unit updateable via Internet
16. Highly reliable and accurate
17. Easy-to-read crystal-clear backlit large 128 x 64 LCD display
18. Safely communicates with the on-board computer
How to see if your vehicle is comliant with OBD II?
Please pop the hood and look for a sticker named "VEHICLE EMISSION CONTORL INFORMATION".

KONNWEI KW808 Languages

English, French, German, Dutch, Spanish

KW808 Vehicle Coverages

KW808 supports both diesel and gasoline vehicles, as long as the car is compliant with standard OBDII protocols, with OBDII 16pins Diagnostic Port. Reads & clears generic and some maunfactures trouble codes.



American (USA) car
for Standard OBD2 Cars from 1996 to Now:
for Chrysler, for Ford, for GM, for Jeep

European car
for Standard OBD2 Cars from 2003 to Now:
for Alfa Romeo , for SAAB , for Acura , for Opel, for Audi , for Seat , for Peugeot , for Bentley , for Skoda , for Daewoo, for Benz , for Daihatsu , for Land Rover, for BMW , for Vauxhall , for Citroen, for Volvo , for Fiat , for VW , for Ford , for Jaguar

Japanese car
for Standard OBD2 Cars from 2008 to Now:
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru , for Suzuki, for Toyota.

Warning:
Not Support Russian Cars before 2012, VAZ,UAZ,LADA ; Not works with trucks
for Renault, SsangYong,
Not Support Opel Corsa c 2004 1.3 CDTI Nor Support vw golf 4 2002
Not support Citroen C4/C5 .
Not support Chevrolet cars ,
Not support Renault Logon/ megane
Not support skoda fabia .
please contact us before purchasing.

KONNWEI KW808 Support Protocols

1.ISO9141-2(5 baud init,10.4Kbaud)
2.ISO14230-4 KWP(5 baud init,10.4Kbaud)
3.ISO14230-4 KWP(fast init,10.4Kbaud)
4.ISO15765-4CAN(11bit ID,500 Kbaud)
5.ISO15765-4CAN(29bit ID,500 Kbaud)
6.ISO15765-4CAN(11bit ID,250 Kbaud)
7.ISO15765-4CAN(29bit ID,250 Kbaud)
8. SAE J1850 PWM (41.6 Kbaud)
9. SAE J1850 VPW (10.4 Kbaud)

Item pictures

Pckage list

1 x Scanner
1 x Cable
1 x Nylon Carry Case
1 x English Product Manual