If you need the newest D16 car jump starter, you may click above photo:)

OBDIICAT-HK01 Instruction:

1. Remove the key from the ignition.

2. Plug the chip into the OBD2 port.

3. Insert the key and turn the ignition switch on (do not start the car).

4. Wait for about 10 seconds while your chip communicates and establishes connection with the car. The lights will flash once connection is established.

5. Start your car and drive as usual.

7 Major Features

First function , increase power

Release h the potential of your engine and accelerate faster.

Second function,improve the acceleratorhysteresis

Improve your acceleratorresponse speed, and getpower onceyou step on it

Third function, slow down the gear shift

Slow down the gear shift during driving and improve driving fluency

Fourth function, enhance the torque

Improve torque output power, full of acceleration and push-back feeling.

Fifth function, protect the engine

Optimize engine intake and ignition to improve energy efficiency.

Sixth function, reduce fuel consumption

The unique power fuel-saving and efficiency adjustment technology can improve the comprehensive performance of the vehicle, improve the combustion efficiency, and save fuel.

Seventh function, reduce vehicle noise

Good at reduce vehicle engine noise, enjoy tranquility

OBDIICAT-HK01 can work for both Diesel and Benzine Cars 2in1 .

OBDIICAT-HK01 necessarily for cars:

- Sold after January 1, 1996 in the USA

- Sold after January 1, 2001 in the European Union

- With diesel engine sold after January 1, 2003

Doese your car have OBD2  Connector?

On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990.

OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.

Where located OBD2 Connector?

1 Driver's side, underneath dasboard, in the area under the steering column,

2 Driver's side, underneath dasboard,between the driver-side door and steering column area

3 Driver's side, underneath dasboard, between the steering column area and the center console

4 Driver's side, dashboard instrument/gauge area, between the steering column and center console

5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column

6 Center console, vertical surface  left of vehicle centerline

7 Center console, vertical surface right of vehicle centerline or on passenger side of center console

8 Center console, horizontal surface  in front passenger area.

OBDIICAT-HK01 Certificates:

CE / FCC /  RoHS