Digiprog 3 V4.94 Odometer programmer DigiprogIII Mileage Tool

DIGIPROG3 screen operation problems:

Description：

This is the cheapest main unit of Digiprog III with OBD2 cable, software version is V4.94. With the use of the new Digiprog III, the odometer is a breeze. Intelligent accessories and extensive manuals are enclosed. This is the cheapest but useful odometer tool.

NOTE :The product does NOT contain computer software, we only provide 4 reference files: Wire Color Changed List, Adapter Cable Manual, Supports List，Operation guide for some models

Pay attention:

1. The product cannot be updated.

2. Generally support the models from 2005 to 2011 years, the year of the specific model is not determined, if you need a support list, you can contact the seller's customer service.

3. The screen of the product is a resistive screen, and it takes a little effort to click the button.

Top 4 Reasons to Get This Main Unit of V4.94 Digiprog3:

1. Latest software Version: V4.94

2. Supported Multi-Languages: Deutsch, English, Espanol, French, Portuguese, Italiano,Turkish, Nederlands.

3. OBD Version are only main unit and obd2, st01 and st04cable inside the package,lighter and easier to pass custom house.

4. Cheapest price

Notice:

1.If you want to upgrade your digiprog 3, need to return the main unit for upgrading，please do not update online by yourself.

2.The Link have Digiprog3 OBD Version and Normal full set Version Optional.

3.The link has  Normal Chip and FTDI FT232BL&93C46 Chip version optiona. (FTDI version is more qualified.)

4.It can not connect to the computer when you use it. Otherwise it would have the Blue-Screen problem.

5. The password is "1" . After you type "1" and then choose mark " √ ". Then you could work with it at once!（click tick" √"not " X", otherwise Digiprog3 will freeze.）

Function：

speedometer, engine control units, operating hours counter, keys, memory error, motorcycles, etc.DIGIPROG III Machine with full software Include

With the use of the new DIGIPROG III the odometer is a breeze. Intelligent accessories and extensive manuals are enclosed.

Features:

The Digiprog 3 Tachojustiergerat is the leading system for setting and programming digital speedometer.

The Digiprog 3 is the system, modern hardware and latest software tachometer and speedometer for everyone in the simplest way possible.

You can use the Digiprog 3 for all speedometer, and engine control units, operating hours counter, keys, memory error, motorcycles, etc. easily programmed.

You get the unit of course with all the necessary cables as well as an image and textual manual.

Other features:

Assyst processing

Fault memory read-erase

EEPROM programmer

Integrated PC communication

Digiprog 3 Menu:

1. EEPROM Menu

The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.

2. CAR/TRUCK Menu

This is the menu you will use for reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.

3. Motorcycle Menu

This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.

4. Special Functions Menu

The special functions menu is for use only by official DigiProg dealers.

Using the EEPROM Menu:

On some of the vehicles you will come across, an 8pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur ,you can always return to the point you started.

The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg3 by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.

Digiprog 3 How to use ？

1.Turn off your engine and locate the "Function" button on the front of DigiProg III Mileage tool

2.Press and hold the "Function" button while turning the engine on. DigiProg III Mileage tool will now enter calibration mode.

3.Press the "Function" button repeatedly to scroll through the options until you come to "Auto."

4.Press and hold the switch until "-" is displayed. Release the switch when this appears. "Unit" will now appear on the display.

5.Wait until "Cal" appears on the display followed by zeroes, then drive your automobile until one mile clicks over on DigiProg III Mileage tool

6.Stop the car and then press and release the "Function" button. The mileage is now set.

Important Tips for Using Digiprog 3:

1. DO connect the Eeprom to the ST01 or ST04 before you connect to Digiprog3, which will avoid Electro static feedback (ESD).

2. Never solder the connections whilst the lead is connected to the programmer, which will damage DigiProg3.

3. DO keep your DigiProg3 in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned completely, as the solvent will damage the clips.

Please Note:

It can supports car models from 2005~2011mostly,but it does not means it supports all cars during those year.Car List is just for reference ,need to check with each car on real operation .

Some car have protection itself,maybe it can not supports .

It can not supports for VW golf very well.

OBD Version(OBD FTDI) Packing List:

1 x Digiprog III Main Unit

1 x OBD2 cable

1 x ST01 (01/2)cable

1 x ST04 (04/2)cable

1 x (01/4)adapte

1 x Power adapter

1 x CD

Full Set Version(Full Set FTDI)Packing List:

1 x Digiprog III Main Unit

1 x OBD2 cable

1 x ST01 (01/2)cable

1 x ST04 (04/2)cable

1 x (01/4)adapte

1 x Other cables

1 x Power adapter

1 x CD

Q&A：

Q:Does Digiprog III for BMW after 2008year? Does Digiprog3 make key for BMW?

A:better use Digimaster 3 to mileage for the high-end for BMW. Digiprog3 can't make key for BMW, advice you use AK300 key pro.

Q:what is Digiprog III power-on password?

A:Digiprog 3 Power-on password is 1. After enter password "1",click tick" √"not " X", otherwise Digiprog3 will freeze.

Q:What is the difference between tacho pro 2008 and digiprog 3?

A:tacho pro 2008 and digiprog 3 share the same function. But tacho pro works with the car before 2006 year, digiprog 3 works with the car even up to 2012 year.

Q:What is ST01, ST04 cable used for in the package of Digiprog 3?

A:It needs to remove chip when you mileage for some car models. One end of the ST01 cable and ST04 cable clip the chip, and the other end connect to digiprog3.

Q:I use digiprog3 to work with Opel Astra 2004, and the manual suggests use No.1 cable, this cable is ST01?

A:Yes, No.1 cable is ST01 cable, and the software needs to open off-line programming or online-programming.

FTDI Chip：