Set of extractorsDesigned for gentle dismantling of contacts (flat, round, rectangular and other) from connectors. Extractors included in the kit are used to unlock contact locks in electrical connectors.

The kit allows you to work with almost all the connectors used on cars, trucks and buses. Can be used in the car service as a professional garage tool.

Working principle:

There are a large number of types of connectors that may differ in size, geometry (rectangular, round), number and location of contacts, shape of contacts, etc. However, they all have one general constructive feature: each contact (it is about the jacks) is placed in a separate cell, holding in it by means of a force of friction or. which rests in the cell from the inside). Therefore, to extract contacts the easiest way to squeeze them from their cells is on this principle and is based the extractor for disassembly of connectors.

Order:

-If the connector is collapsible or there is a lock on it-disassemble it or remove the lock;

-Pick up a tool with a tip that fits the type and size to the contacts of the connector (for Round single pins-round tip, for flat pins-ends) for contacts of complex form inserted in cross-shaped or other form of cell-fork tips, etc.);

-Insert the tool into the cell (on the front side of the connector) and press the contact easily.

If the tool is chosen correctly, then disassembly of the connector will pass quickly and without damage to the wiring.

Main features:

-Material: stainless steel 301

-Application: automotive wire extraction tool

-Single pin diameter: 0,8mm/1mm/1,2mm/1,4mm/2,0mm

-Double pin diameter: 2mm/3mm/4,5mm/6mm

-Studded hexagon (inner diameter: 2mm/2,6mm/3,2mm/3,9mm/4,9mm/6,2mm)

Package includes:

-Extractors for removal of terminals in the number: 8 pieces/11 pieces/14 pieces/18 pieces/21 pieces/26 pieces/29 pieces/36 pieces/38 pieces/39 pieces/41 pieces (Qty depends on selected set)