Top Quality Full Chips ECO Nitro OBD2 Fuel Save Performance Chip Tuning Box More Power

Torque EcoOBD2 Diesel Benzine NitroOBD2

1. Nitro OBD2 Chip Tuning Benzine Functions:

Color:

YellowFor Gasoline Cars.

Green For GasolineCars

Red For Diesel Cars.

Blue For Diesel Cars

2. ECOOBD2 Benzine Chip Tuning Box Functions:

With Retailing Package

Finding ECU Hidden Power/ Save Fuel 15%

Single Board Chips Display :

Nitro OBD2 Chip Tuning Product Features:

1.Up to 35% more power

2.Up to 25 % more torque

3.Nitro chip tuning is very easy to use

4.Plug Nitro OBD2 chip tuning into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on

5.Nitro OBD2 chip tuning settings are optimal and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment

6.Nitro OBD2 chip tuning will recognize your vehicle and your driving habits after around 200 km/150 miles driving, and then Nitro chip tuning adjusts itself to match your car perfectly

ECOOBD2 Chip Tuning Product Features:

1 EcoOBD2 finds out the hidden power of your car.

2. -Up to 15% fuel saving

3.ECOOB2 chip tuning is very easy to use

4.Plug ECO OBD2 chip tuning into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on

5.ECOOBD2 chip tuning settings are optimal and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment

6.ECOOBD2 chip tuning will recognize your vehicle and your driving habits after around 200 km/150 miles driving, and then Nitro chip tuning adjusts itself to match your car perfectly

1. What does ECOOBD2 Plug chip tuning make?

According to your driving habits, Nitro OBD2 makes new map in the car's computer ECU to increase the performance of your car. As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.

2. What is NitroOBD2/ECOOBD2 Chip Tuning Box?

Nitro OBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car. When it plugged into OBD2 connector, Nitro OBD2 receives the information from the car computer ECU. With the received data from ECU, Nitro OBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car. Nitro OBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine. Nitro OBD2 finds out the hidden power of your car. Nitro OBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting. Nitro OBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug Nitro OBD2 from OBD2 connector.Nitro OBD2 finds out the hidden power of your car.

Nitro OBD2 Chip Tuning Benzine: More Power / More Torque

Nitro OBD2 chip tuning Diesel is a Plug & Drive Ready device to function the increasing the performance of engine. Nitro chip tuning is easy to install. Just plug it into the OBD2 connector of cars. Nitro chip tuning fits all car from the year of 1996. It works based OBD2 protocols as remaping the Car's computer ECU. After driving 200 km road total, Nitro chip tuning adjusts itself to the car, according to the drivers' habits and always keeps remaping the ECU to increase the performance of engine.

ECOOBD2 chip tuning works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map. The main difference between Nitro Chip Tuning Box and Remapping tuning methods is that Nitro Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. OBD2 Nitro chip tuning is the cheap and safe type of tuning. Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it. Nitro chip tuning is equipped with the engine protection function and 100% safe for your car engine. OBD2 Nitro chip tuning produced on the printed circuit board in SMD technology. Nitro OBD2 Chip Tuning Boxes are high quality.

ECOOBD2 / NITROOBD2 chip tuning Installation and Calibration:

1. Pull the Car Key out from the ignition

2. Find OBD2 connector(*) in your car and Plug in OBD2 Nitro chip tuning.

3. Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

4. Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (Nitro OBD2 will communicate and establish connection with ECU)

5. Start up the engine

6. Nitro OBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus Nitro OBD2 will adjust itself to match your car perfectly for more fuel saving

Where located OBD2 connector in your car?

1 Driver's side, underneath dasboard, in the area under the steering
column,
2 Driver's side, underneath dasboard,between the driver-side door and steering column area
3 Driver's side, underneath dasboard, between the steering column area and the center console
4 Driver's side, dashboard instrument/gauge area, between the steering column and center console
5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical surface  left of vehicle centerline
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
8 Center console, horizontal surface  in front passenger area.