GOOD NEWS

>>Added some 2022 models, work for Brazil GM, Fiat now，updated once a month!

Thinktool Mini is the Best OBD II Diagnostic Device,it can do for you:

1.Full system diagnosis & 28 Reset Service function
--One-Key update free lifetime,no need to pay any update fee.

2.Support 120+ Vehicle Brands,5000+ Car Model
--All supported car brands softwares are included, you don't need to buy softwares separately.

3.Multi-language selection and manual
--Freely switch languages (English, Russian, French, Spanish, Portuguese, German, Italian,Japanese)

4.Support 8 Expandable Module Function
--Support the installation of printers, Thermal Imager, Battery Tester, Video Scope, Worklight, Scope Box, TMS G1 and Moduledock.

5.VIN intelligent recognition & Bluetooth connection
--Intelligent vehicle model identification via VIN,Save your time and easy use.

6.Global Version, No IP limited.
--You can use it everywhere in the world.

7. Additional functions, convenient and quick
--In addition to the above functions, the built-in camera supports taking pictures; screenshots and videos; one-click sharing of diagnostic reports; convenient to record the maintenance and diagnosis process of your car.

Lifetime free update for 28 Special Service Function:

1.A/F Reset

This function is applied to set or learn Air/Fuel ratio parameter

2.Oil Lamp Reset Service

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

3.EPB Electronic Park Brake Reset

It is important in the maintenance of electronic braking system's safety and efficiency.

4.BAT battery service

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

5.DPF Diesel Particulate Filter Reset

Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

6.SAS Steering Angel Sensor Reset

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

7.TPMS Tire Pressure Monitoring System Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

8.IMMO Key Programming

The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

9.ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

10.Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

11.Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

12.Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

13.AFS Headlamp Reset

'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

14.Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

15.Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

16.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

17.EGR Reset

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

19.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.

20.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

21.AT Learning

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

22.Language Change

This function is used to change the system language of the vehicle central control panel.

23.Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

24.Cluster Reset

a) Cluster reset is to use the car diagnostic computer and data cable to restore the kilometer value in the odometer chip to make the odometer display the actual mileage.
b) Usually when the mileage is incorrect due to damage to the vehicle speed sensor or malfunction of the odometer,
Cluster reset is required after maintenance.

25.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

27.Transport Mode

ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

Note:
These special function NOT for all car models, if you are confused, you can send your car brand, model and release year to me, I will check for you.

Please Leave us message in below format, we will reply you within 8 hours. For example : xx, 2005, 2.0cc, Diesel

Thinktool mini Automotive Scanner All Systems Diagnostics:

All Controlled Modules Scanning and Problem Diagnostics, such as Engine System, Airbags System, ABS System, Transmission System, Brake System, Alarm System, Keyless Entry System, TPMS System, Steering System, Wheel System, Fuel System, etc.

This comprehensive scanning process is able to locate the faulty systems and retrieve the DTCs related easily. So you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, and everything else.

Powerful Add-On Features：

Auto VIN Scan: Automatically recognize the car without manual input
Screenshot：Take screenshots and save important diagnostic data anytime, anywhere
Screen Recorder:Can record diagnostic tutorials
Wifi-Upgrade：One-click upgrade to the latest version

Thinktool mini supports languages:

English, French, German, Spanish, Italian, Portuguese, Japanese,Russian

Support more than 120+ Car Brands,Include 5000+ Car model

Asia Car:
-for DAEWOO, for HONDA, for HYUNDAI, for INFINITI, for KIA, for MAZDA, for MITSUBISHI, for NISSAN, for SUBARU, for TOYOTA, for ISUZU, for DAIHATSU, for FUTIAN, for LIFAN, for SSANGYONG, etc.

American Car:
- for CHRYSLER, for GM, for US-FORD, for FIAT (BRAZIL), for GM (BRAZIL), for DODGE, for JEEP, for BUICK, for CADILLAC, for CHEVROLET, etc.

European Car:
- for ASTONMARTIN, for AUDI, for BENZ, for BMW, for FIAT, for JAGUAR, for LANDROVER, for SAAB, for SEAT, for SKODA, for SMART, for VOLVO, for OPEL, for PEUGEOT, for DACIA, for CITROEN, MINI, for PORSCHE, for SPRINTER, for VW, for ALFA ROMEO, for VAUXHALL, for EU-FORD, for FERRARI, for IVECO, for MASERATI, for UAZ, for VAZ, for BENTLEY, for BUGATTI, for DR, etc.

If you don't know if the function you want support your car,Please Leave us message in below format, (For example : xx, 2005, 2.0cc, Diesel,I want to do xx function), I will check for you.

Thinktool mini Support Printing Test Report! !

After you check the car, you can share car diagnostic data via email, you can also print the report directly through the printer.

Thinktool mini Function Display:

Product detail:

Product introduction and product parameters

Operating System: Android 7.0
RAM: 32G
Battery capacity：6000mAh
LCD: 5.99 inch
LCD Resolution: 1920*1200 IPS
Touch Screen Camera:800 megapixel
Connection Method: Wi-Fi
Bluetooth: Supported
Working Temperature: 0 ~ ℃ 45℃
Storage Temperature: -20 ~ ℃ 70℃

Package Content:

• 1*Thinktool mini
• 1*Bluetooth (Pre-installed in the Unit)
• 1*Charging Cable
• 1*Passport Envelope
• 1*User Manual

Unique accessories make thinktool mini have more additional functions

Priter: support diagnostic report print service

Worklight: offer lighting assistant service

Video Scope: allow technicians to check faults in narrow and dark space

Modular Dock: rechange for the table
Thermal Imager: scan and capture temperature

Scope Box: support diagnostic reportprint service

Battery Tester: offers battery check services

Thinktpms G1: bring tpms service to your smartphone

note:need to buy these modulars seperately in the thinktool mini after you receive it

.Additon Function you may need

--Ecu Coding and Active Test
(These two functions can buy directly at the "thinkcar store" in thinktool mini,49.95 dollars one brand one year each)

Ecu coding:

The Coding function is used to re-flash the vehicle control modules.Thinktool mini diagnostic scan tool allows you to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts.
With ECU coding,you can do these things with thinktool mini
Power window
illuminatedentry
Waining
Light control
Slight roof
Air conditioner

Active Test:

This thinktool mini full system obd2 scanner request information or command a module to perform specific tests and functions. For instance, in the case of OBD II generic information Mode 1, you can initiate a request for information from the powertrain control module, and the PCM responds by sending the information back to the scan tool for display.
With Active Test Function,you can do these things with the scanner
Open/Close the sunroof
Turn on the radiator fan
Operate mirros
Test door lock
Sound Horn
Test door lock actuators
Turn on interior/exterior light