How to Update and Download the Softwares that please refer to this video

THINKSCAN S99 Optional One Car Brand Lifetime Free All System Diagnosis+5 Resets Oil,Brake,SAS,ETS,DPF.

Why You Need THINKSCAN S99

ThinkScan S99 is a Customized Vehicle diagnostic tool.You can choose one brand as you need it.It include 5 Reset services,Oil,Brake,SAS,ETS,DPF.Except these,it also have fulll system diagnostic and full obd 2 functions.

All System Diagnostic Lifetime Free:

With superior systems diagnoses, this multipurpose obd2 scanner can be used to read all available systems’ ECU information to facilitate the vehicle diagnosis. The complete systems vary from different cars and they usually include Engine, transmission, ABS, SRS, SAS, TPMS, EPB and Fuel systems etc.

1. Read DTCs from the vehicle’s control systems to locate problem areas, and offer solutions;
2. Erase the codes easily after DTCs retrieving and certain repairs have been carried out;
3. Live data shows each parameter item displayed in analog, text, waveform graph modes etc.;

5 Mainuance Services Resets Lifetime Free:

This OBD2 scanner is specially designed to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances. There is some commonly-used special reset services are listed for your reference:

1.ETS Reset –Evaluate the Electronic Throttle Body System , monitor the close-circuit current and voltage, and activate reset after disassembly, replacement or cleaning throttle body.

2.Oil Lamp Reset –Perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate.

3.SAS Reset –perform calibration for the Steering Angle Sensor, which permanently stores the current steering wheel position as the straight-ahead position in the sensor EEPROM.

4.EPB Reset –Maintain the electronic braking system safely and effectively by deactivating and activating the brake control system, setting brakes after disc or pad replacement, etc.

5.DPF Regeneration –Manage DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

Full OBD/EOBD Functions Lifetime Free

Mode 1:Read live data stream
Mode 2:Read freeze frame data
Mode 3:Read DTCs(diagnostic trouble codes)
Mode 4:Clear dtcs
Mode 5:Oxygen sensor monitoring
Mode 6:System monitoring
Mode 7:Read pending DTCs
Mode 8:Control operation of on-board system
Mode 9:Read vehicle information
Mode 10:Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information.

Support 8 Multi-Langauge

Do you want to use your native language for diagnosis? Don’t worry, THINKCAR THINKSCAN provides multiple languages for you to switch ，English , French , Spanish , German , Russian , Italian , Portuguese , Japanese

Support Cover 38 Car Brands ,Support 98% Vehicles Models With OBD II

For AUDI , For BENZ , For BMW , For CHRYSLER , For CITROEN , For DACIA , For DAEWOO , For FIAT , For GM , For HOLDEN , For HONDA , For HYUNDAI , For JAGUAR , For JPISUZU , For KIA , For LANDROVER , For MAHINDRA , For MARUTI , For MAZDA , For MINI , For MITSUBISHI , For NISSAN , For OPEL , For PEUGEOT , For PORSCHE , For RENAULT , For SAAB , For SEAT , For SKODA , For SMART , For SPRINTER , For SUBARU , For SUZUKI , For TATA , For TOYOTA , For USAFORD , For VOLVO , For VW...

4 IN 1 Scientific Data Management: Live Data Stream Graph & Record Data & Diagnosis Record Playback & Print Report

The professional vehicle scanner tool can scientific graph data, record data, play back data, freeze frame,and print reports.

In the real-time diagnosis process, important diagnosis information can be instantly stored in the memory, including reading of fault codes and frozen frames and real-time data streams.
After real-time diagnosis is completed, Diagnosis function record playback, the diagnosis information and process previously saved in the memory can be replayed to facilitate the analysis of various data information.
One-click generation of a diagnosis report after diagnosis will help users quickly solve problems, avoid blind maintenance, and save money/time.

How to register & update:

Step 1: Connect the scanner with PC by type C cable. Enter the device menu ""Help--Tool Information"" and take a photo to record the information displayed.
Step 2: Download update software from office website on computer.
Step 3: Click the ""Update Tool Setup.exe"" and follow the message to install the client software on computer.
Step 4: Insert the TF card into the card reader and insert the card reader into your PC port. It will read the product ""Serial Number"" automatically.
Step 5: Hit ""Device Upgrade"" to enter the register page, type your email info , check the ""Register Code"" on the photo you take before.
Step 6 : Very Very important !!! After upgraded on computer, insert the tf card to scanner, then using the type c cable to charge a while. Now the update finished.
Prerequisite conditions:
1. Go to http://www.mythinkcar.com to download the update tool and install it on the computer.
2. System requirements: Windows XP, 7, 8 or Windows 10.

Follow the steps below to update the tool:

1. Note down the Serial Number and Register code.
1).Connect one end of the USB cable to your tool, and the other end on the computer.
2).After the tool has powered up and entered the main menu screen, move the highlight bar on the ""Help"" icon and press [OK].
3). Highlight the ""Tool Information"" in Fig. 1 and press [OK].
4). Write down the Serial Number and Register code for later use.

2. Register the scanner on the update tool (for initial use).
1).Launch the update tool, a screen similar to Fig. 3 will appear
*Note: Once the S/N is entered, “Restore System” becomes activated, which is used to restore system if a new memory card is replaced.
2).Select the target language and enter the Product Serial Number, click [Device Upgrade], a screen similar to Fig. 4 will appear.
3).Enter the required E-mail address and Register Code, click [Submit] to finish the sign-up.
*Note: For initial use, user needs to go through a registration process. Once you finished it, the registration screen will not appear again each time you click the [Device Upgrade] button in the future.

3. Copy the update package into the memory card.
1).Install the memory card from the tool into the supplied memory card adaptor and insert into the USB port of the computer.
2).Reopen the update tool, select the updates you would like to performor click ""Select All"", and then click [Download] to start downloading the update package into the memory card.

4. Reinsert the memory card into the tool and start update.
1).Once all steps are complete, find the mem
2). Connect the tool to the computer via USB cable.
3).The tool starts verifying the consistence of the local files with the files in the memory card. If difference exists, the tool will automatically start updating and a green update progress bar will appear on the bottom of the screen. Be patient to wait until the update is completely finished.
*Statement: All information and illustrations in this Quick Start Guide are based on the latest information available at the time of printing. Due to continuing improvements, actual product may slightly differ from the product described herein, and this
Quick Start Guide is subject to change without prior written notice.

Specification:

Display: 3.5""LCD with good visual effect
Operating Temperature: 0 to 60 (32 to 140)
Storage Temperature: -20 to 70 (-4 to 158)
Power: 8 to 18 V provided via vehicle
Supported Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898
Weight: 0.8Kg

Packing list

Thinkscan S99
OBD2 cable*1
Card reader*1
Manual book*1"