1.Function is more :

2021 New Version can Support more Cars and Reset Function Free than Old thinkdiag

. (New Version Suppot all car software +15 reset functions. )

How to choose?

------Type 5 and Type 6 isOld Thinkdiag:

Also supports Thinkdiag App

-----Type 1 and Type 2 is 2021 new version :

Support 115 car brands + all software +1year free update (Pls use offcial program: Thinkdiag)T

3.Support More Phone system :

2021 New Version Support 1 more Phone System than Old thinkdiag (New Version Support for ios and Andriod System too .)

Why Choose Thinkdiag

1.Read fault Codes For All System ,such as ECM, TCM, ABS, SRS, BCM, IMM, BMS, TPMS, SAS, Fuel System, Light System, Wiper System, etc
2. Bi-Directional/Active Test + ECU Coding + Adaptation + Matching
3. Full OBD II and EOBD functions for full system scans
4. 15 Maintenance Functions+Auto VIN Scan Tool
5. Support 115 vehicle brands
6. Live Data Stream Graphing + Data Record+Print Vehicle Health Report Print +Remote Diagnostic Car Scanner
7. Vehicle owner community
8. Compatible with both Android / iOS handsets and tablets
9. Palm-sized, portable, and powerful

Support all ECUs of 12V EFI car models-Full Sysyem Diagnosis

Thinkdiag can diagnose the electronic control system of prevailing vehicle models covering Asian,European, American and China. Full range car models and full car system diagnose make itaprofessional automotive diagnostic tool.
Include : ABS system, Engine system, SAS system , TPMS system , IMMO system , Battery system ,Oil service system , SRS system , ect...
Diagnosis functions include: Read DTCs, Clear DTCs, Read datastream, Actuation Test , ECU coding and 15 Special Function ect...

ECU Coding

Every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH pro mini is equipped with advanced ECU coding function for addressing the following issues:
1. After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.
2. ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.
!!!!Note: ECU Coding and Key FOB Programming are not universally compatible with all vehicles! Send us VIN number to check compatibility.

Support 15 common special functions

1.Oil Reset Service
2.Steering Angle Calibration
3.Electronic Parking Brake Reset
4.Battery Register & Battery Maintenance
5.ABS Bleeding
6.Electronic Throttle Position Reset & Learn
7.Diesel Particulate Filter (DPF) Regeneration
8.Tire Pressure Monitor System Reset
9.Anti-theft Matching
10.Injector matching
MaEET
11.Air Suspension Reset
12. Gearbox Reset
13.Sunroof RESET
14.EGR Reset
15.AFS reset

The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset themileage or driving time to zero after the maintenance, so the maintenance light will go out and the systemwill start a new maintenance cycle.

To reset the steering angle, first find the relative zero point position for the car to drive in straight line.Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor, replacing steering mechanical parts (such as steeringgearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recoveringcar body, you must reset the steering angle.

lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to theon-board computer to replace the brake pad.After replacing the brake pad, you must reset the brake pad.Otherwise, the car alarms.

This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, inwhich the original low battery fault information will be cleared and battery matching will be done.

When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system torestore ABS brake sensitivity. lf the ABS computer,ABS pump, brake master cylinder, brake cylinder, brakeline, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.

Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learningvalue of the ECU returns to the initial state.By doing these, the movement of the throttle (or idle motor)can be more accurately controlled, thus adjust the intake volume.

DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuouscombustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reducePM ignition combustion) to stabilize the filter performance.

After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting functionmust be performed to reset tire pressure and turn off the tire pressure MIL.Tire pressure resetting mustbe performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tirepressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged,andtire is replaced for the car with tire pressure monitoring function.

The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires. lf gear learning is not performed for a car equipped withDelphi engine, the MlL turns on after the engine is started.The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car.After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, orcrankshaft flywheel is replaced, or the DTC 'gear not learned" is present, gear learning must be performed.

To prevent the car being used by unauthorized keys, the anti-theft key matching function must beperformed so that the immobilizer control system on the car identifies and authorizes remote control keysto normally use the car. When the ignition switch key, ignition switch, combined instrument panel,ECu,BCM, or remote control battery is replaced, anti-theft key matching must be performed.

Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identifyinjectors to accurately control fuel injection.

This function can adjust the height of the body. When replacing the body height sensor in the airsuspension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration.

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impactproblem. In this case, this function needs to be done so that the gearbox can automatically compensateaccording to the driving conditions so as to achieve more comfortable and better shift quality.

This function can set the sunroof lock off, closed when it rains,sliding / tilting sunroof memory function,temperature threshold outside the car etc.

This feature is used to initialize the adaptive headlamp system.According to the ambient light intensity, theadaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjustthe headlamp lighting angle while monitoring the vehicle speed and body posture.

This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.

Full OBD2 Full Function

This diagnostic software can test vehicle Engine systems.All models with engine meeting SAE J1850,ISO9241-2,ISO14230-4,ISO15765 Standard in OBD2&EOBD.
*View freeze frame date
*support graph data stream
*O2 Sensor test
*Evap system test
*On-Board monitor test
*Read & Clear DTCs
*Identify VIN information
*DTC code look up
*Turn off MIL(Malfunction Indicator Lights)
*I/M Readiness status test

8-language support

The THINDIAG operating system can quickly be changed into English, French, German, Spanish, Italian, Portuguese, Japanese, Russian

115 Car Brande Support

For OBDII diagnostics, the obd2 code reader works great for most cars built in 1996 or later, being compatible with following protocols:
-ISO 14230-4 (KWP2000)
-ISO 15765-4 (CAN)
-ISO 9141-2 (iso)
-ISO 14229 (uds)
-SAE J1850 (VPW & PWM)
-Original protocols of makers
For advanced functions as active test, all system diagnostics, and maintenance service, it covers 95% of car models available in the market including:
-Asia:
for Daewoo, for Honda, for JP Isuzu, for Kia, for Mazda, for Mitsubishi, for Nissan, for SGM, for Subaru, for Suzuki, for Toyota,for Hyundai, for Ssangyong
-Europe:
for Aston Martin, for Audi, for Benz, for BMW, for Citroen, for Ferrari, for Fiat, for Land Rover, for Maserati, for Opel, for Porsche, for Renault, for Rover, for Saab, for Seat, for Skoda, for Smart, for Sprinter, for Volvo, for VW, for Peugeot
-America:
for Chrysler, for USA-Ford, for GM
And keep updating.

Item Parameter

THINKCAR V1.23.004 Thinkdiag Full System All Software 1 year free OBD2 Diagnostic Tool 16 reset services Ecu coding PK Elm327

Model:Thinkdiag

Working Voltage: 9~18V

Working Current: ≤130mA

Working Temperature: 14℉~122℉(-10℉-50℉)
Storage Temperature: -4℉~140℉(-20℉-60℉)

Size: 2.1in*3in*1.1in

Net Weight: 2.80ozBuyer Questions & Answers

1.Does thinkdiag work on all vehicles ?

It support more than 115 brands,almost kinds of cars in the world .

If you buy one Thinkdiag , you will get:

Thinkdiag + All software ( all car software + all reset software ) 1 year free update .

2.How to change language?

It don't support change language, the APP language will follow the system language of your phone.

3.Can it support truck ?

No, it don’t support 24V car.

4.What’s the series number ?

The Serial number is 97986xxxxxxx

5.Does it work with X431 ?

ThinkDiag works with Thinkdiag APP only

( Better than Thinkdriver , thinkdiag mini , autel ap200 , autel ap200m ,MUCAR BT200)

6.What's the difference between Thinkdiag and Thinkdriver ?

They both belong to Thinkcar brand , which is the main brand of LAUNCH. ThinkDiag supports all car software and all reset software free , but Thinkdriver is only with 3 cars'vin free , the others need subscription

7.What APP should i download ?

Pls download ThinkDiag APP only

8.Can I use it after 1 year?

Yes , you can still use it after 1 year , do not worry . The Full obd function are life-time free update .

9.Can Thinkdiag work no internet ?

Yes , after you update , you can use Thinkdiag without internet .

10. I got Thinkdiag , but can not download the software , why ?

Do not worry , pls make sure you download Thinkdiag APP ,if not , pls change , then it is ok !

Thinkdiag Packing List :

Color 1 : 1pc Thinkdiag Old Version ( 1pc obd cable as gift )