Item specifics
-
Item Type
Theft Protection
-
Item Weight
0.25kg
-
Material Type
ABS
-
Brand Name
PUOU
-
product name
burglar alarm
-
Applicable models
General purpose
-
Features
Motorcycle burglar alarm
-
Features1
Remote start
-
Features2
Remote flameout
-
Features3
Horn alarm
Specification: 100% brand new. Working voltage: For DC 12V (9V~14V) Static Current: <=4mA Working temperature: -10℃~+50℃ Remote control working voltage:DC6V/9V/12V Remote control frequency range: 315Mhz or 433Mhz Remote control distance: open areas《150M Item Size: like the picture show. Package Size: about 15.8cm(L) X 9cm(W) X 6.5cm(H) Features: - 100% Brand new. - Phonic alarm, it can be use to locate your motorcycle - Engine immobilization and anti-hijacking functionality - Four sensitivity alarm settings - This is a simple DIY installation unit with no special tools needed Function Key: (4 buttons) Arm/Anti-robbery: Remote lock Disarm: Remote unlock style Remote Start Engine: Remote start style Find Vehicle: A bell style Functions: 1. Arm: Press the Arm/Anti-robbery button, the indicator light flashes once, the siren beep once and the status of alarm will be activated automatically after 3 seconds. 2. Disarm: Press the Disarm button, the indicator light flashes 2 times and the siren beep 2 times, then the alarm system is in the "Disarm" mode. 3. Remote Start ON: Within 2 seconds, the connection press the start button twice, to start the engine. 4. Remote Start OFF: In the start state, Press the Disarm button to stop the engine. 5. Find Vehicle: Press Vehicle Finder button, the indicator light flashes 15 seconds and siren beep 15 seconds, Allow owners to find the location of the vehicle, to stop press any button. 6. Anti-robbery and Assistance: When the motocycle is bobbed and is drive away, the motorcycle owner only press the Arm/Anti-robbery button, the engine will stop at once, the siren will beep and the indicator light will flash. 7. Shock Sensor: Warn away: After arming if any light impact, the indicator light flashes 5 times and siren beep 5 times. Full Trigger: After arming if any heavy impact, the indicator light flashes 1 seconds and siren beep (6 tones) 15 seconds. 8. Ignition Trigger: The ignition trigger: in the alarm state, if anyone tries to ignition, the siren starts alarming and the indicators starts flashing. 9. Immobilizer: in the alarm state, the siren starts alarming, the indicator light flashes and the engine cannot be started. 10. Shock Sensor Setting: Keep pressing the fine vehicle button, the remote can adjust the sensor sensitivity of level 1 to 5, according the number of siren beep to set level, (level 1 lowest, level 2 low, ... , level 5 highest) Note: for remote start engine type Package Included: 1x Motorcycle alarm host machine 2x remote controls 1x storage Instruction Note: The remote control does not contain batteries for logistics reasons.  |
eBike Accessories
Motorcycle Parts