2020 UPA USB Programmer Full Adapters V1.3 Car ECU Chip Tuning Tools OBD2 Diagnostic ECU Programmer Adaptors with NEC Function

UPA USB Programmer Description:

New Upa-usb is the full set with all adapters, The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.

Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually.

Additional packages can be covered by commonly available Adapters plugged into the 40 pin ZIF socket.

The main Device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually. (Power from the UUSP to the ISP target can be enabled or disabled by a jumper next to the 10 pin ISP connector)

Top 4 Reasons to Get the UPA USB Programmer:

1. Language: English.

2. Hardware Version:  V2014

3. Software Vesion: V1.3

4. Support Nec Function, but Has No NEC Adapter in the Package

*EEPROM Only:

NEC ..uDP780828A uDP780948 uDP780949 uDP780973 uDP780974

TMS...TMS370CX02 TMS370CX32 TMS370CX36 TMS370CX42 TMS370CX56 TMS370CX56 TMS370CX56 78K0/HC912

TMS370CX58 TMS370CX58 78K0/HC912 TMS375C006

EEproms:

Simply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin Flat-ribbon header, put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there.

For Motorola MCU's:

Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on = target supplied from upa, off = target got own supply). Slide the Adapter over the soldered PLCC MCU on the target PCB. (No soldering, no pinout reviewing, no pin counting, saves lots of time and hassle and let's you make your job faster, precise and easier)

Once your workshop is equipped with our Adapter Set you will have a all new UPA Experience.

UPA-USB Device Programmer V1.3 Update Info:

Added MC9S12HY64/HA32 support

Added Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B, S25FL004A/008A/016A/032A/064A

Added 24C1024, 24C1025 support

Added Bulk erase data memory to PICs 16F913-7/946, 12F629/675

Added script function GetPage

Added script function AutoBaudRateDevice (hc08 devices only)

Added script function GetProgrammerFrameChildCtrl( AChildCtrlName: string): TControl

Added script function EnablePicMemoryAreas ( AProgram, AID, AConfig, ACalibration, AEEPROM: boolean ): boolean;

Fixed bug with script functions ProgramDevice, ReadDevice ... when used with PICs

Fixed bug with SetHC08SecurityBytes (SecBytes: string) function

Fixed bug with 68hc11 reading if Oscillator is not set to Auto

Updated script example files

The software is digitally signed

USB driver upausb.sys is digitally signed

STMicroelectronics ST62*:

ST6240, ST6245, ST6249

For NSCCR16*:CR16HCS5(9), CR16MCS5(9), CR16MES5(9), CR16MFS5(9), CR16MCT5/9, CR16HCT5/9

For Motorola HC05*:MC68HC05B6, MC68HC05B8, MC68HC05B16, MC68HC705B16, MC68HC05B32, MC68HC05E6, MC68HC705E6, MC68HC05H12, MC68HC05L28, MC68HC05P3, MC68HC705P3*, MC68HC05X16, MC68HC05X32

For Motorola HC08*:MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A

For Motorola HC11*:MC68HC11A1, MC68HC11A8, MC68HC11E9, MC68HC11EA9, MC68HC11E20, MC68HC11F1, MC68HC11K4, MC68HC11KA2, MC68HC11KA4, MC68HC11KG4, MC68HC11KS2, MC68HC11KS8, MC68HC11L6, MC68HC11P2, MC68HC11PA8, MC68HC11PH8

For Motorola HC12*:MC68HC912B32, MC68HC912BE32, MC68HC912D60, MC68HC912D60A, MC68HC912DC128A, MC68HC912DG128, MC68HC912DG128A

For Motorola HCS12*:MC9S12D64, MC9S12A128, MC9S12DG128, MC9S12DG256, MC9S12H128, MC9S12H256

For Atmel 8051 Architecture:AT89S51, AT89S52, AT89S53, AT89S8252, AT89S8253

For Atmel AVR 8-Bit Risk:AT90S1200, AT90S2313, AT90S2323, AT90S2333, AT90S2343, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega8, ATmega16, ATmega161, ATmega162, ATmega163, ATmega323, ATmega64, ATmega103, ATmega128, ATtiny12, ATtiny15, ATtiny2313

Microchip PIC12:PIC12F508, PIC12F509, PIC12F629, PIC12F675

Microchip PIC16:PIC16F627(A), PIC16F628(A), PIC16F648A, PIC16F72, PIC16F73, PIC16F74, PIC16F76, PIC16F77, PIC16F818, PIC16F819, PIC16F83, PIC16F84(A), PIC16F870, PIC16F871, PIC16F872, PIC16F873(A), PIC16F874(A), PIC16F876(A), PIC16F877(A)

EEPROMs I2C:24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C65, 24C128, 24C256, 24C512, 85C72, 85C82, 85C92, BAW574252, GRM-003, GRM-004, GRM-005, KKZ-06F, MCM2814, PCA8581, PCF8581, PCF8582, PCF8594, PCF8598, PCF85102, PCF85116, SDA2516, SDA2526, SDA2546, X24C00, X24C01

EEPROMs Microwire:7002, 93C06, 93C14, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86, 93S46, 93S56, 93S66, GRN-001, GRO-002, KKZ-01, S220, S2914, ST61907, XLS93C46

EEPROMs SPI:M35080, 25C010, 25C020, 25C040, 25C080, 25C128, 25C160, 25C256, 25C320, 25C640, M25P05, M25P10, M25P20, M25P40, M25P80, ST95010, ST95020, ST95040, ST95080, ST95160, ST95320, ST95640, ST95P02, ST95P04, ST95P08, X5043, X5045

EEPROMs Miscellaneous:CXK1011, CXK1012, CXK1013, M6M80011, M6M80021, M6M80041, SDE2506, TC89101, TC89102

Package List:

1pcXMain unit

1pcXUSB cable

1pcXCD

1pcX5pin cable

1pcXAdapter Type1 Per eprom I2C,SPI, Microware e M35080

1pcXAdapter Type2 for Motorola MC68HC11P2+MC68HC11PH8-PLCC84

1pcXAdapter Type3for Motorola MC68HC08AS-PLCC52

1pcXAdapter Type4for Motorola MC68HC11KA2/4+MC68HC11KS-PLCC68

1pcXAdapter Type5for Motorola MC68HC(9)08-QFP64

1pcXAdapter Type6for Motorola MC68HC11F1-PLCC68

1pcXAdapter Type7for Motorola MC68HC05H12-PLCC52

1pcXAdapter Type8for Motorola MC68HC11K-PLCC84

1pcXAdapter Type9for Motorola MC68HC11A8/E1/E9/E20+MC68HC11EA9-PLCC52

1pcXAdapter Type10 for Motorola MC68HC11KA2/4+MC68HC11PA8-QFP64

1pcXAdapter Type11 for Motorola MC68HC11K-QFP80

1pcXAdapter Type12 for Extended address

1pcXAdapter Type13 for Motorola MC68HC11A8/E1/E9/E20-QFP64

1pcXAdapter Type14 for Motorola MC68HC05B4/B6/B8/B16/B32+MC68HC705B16/B32-PLCC52

1pcXAdapter Type15 for Motorola MC68HC(7)05E6-SOIC28

1pcXAdapter Type16 for Motorola MC68HC05B4/B6/B8/B16/B32+MC68HC(7)05X16/X32-QFP64

1pcXAdapter Type17 for Motorola MC68HC(9)12B32-MC68HC(9)12D60(A)-QFP80

1pcXAdapter Type18 for Motorola MC68HC11F1-QFP80

1pcXAdapter Type19 for Motorola MC68HC11L6-PLCC68

New Adapter Display:

Old Adapter Display: