Color	with battery without battery
with battery without battery

Descripción
Comentarios de clientes(0)

Item specifics

Origin CN(Origin)
Model Number VDIAGTOOL
color black

Product Description

Car Paint Tester Introduction

The Car Paint Tester is a portable obd2 obdii coating thickness gauge,which can meansure the thickness of non-metallic coating(such as paint,film,etc.) On netal substrate quickly,nondestructively,and accuratly.It is mainly used to measure the thickness of the vehicle's surface paint and other coating meaurement.

Car Paint Tester Parameters

Car Paint Tester Button Functions1.Botton"CLR":Turn on/off,clear.2.Botton"UNIT":Unit Switch,backlight

Car Paint Tester Operation Instructions

1.Measurement preparation

Open battery cover and load two CR2032 button batteries(Not Includes); Pay attention to positive and negative pole.

2.Turn on/off

Leave the instrument hang in the air and press"CLR"button to turn it on,LCD full screen display,which means it enters the measurement state.Then long press"CLR"button to turn it off.

Note:Keep it away from the substrate when starting up.

3.MeasurementPress the probe onto the coated metal substrate lightly,ensure that the instrument should be perpendicular to the surface of the object that being measured.Note:When the probe was pressed on the substrate,the LCD will display"---",then you must wait unit the measurement value displayed the LCD,then remove it from the substrate.If removing before a value is displayed,it will display the last measured value.4.Unit selectionAfter start-up,short press"UNIT"button to select measurement unit mm or mil.5.LCD backlightAfter start-up,long press"UNIT"button to turn on/off the backlight.6.Clear screen dataAfter start-up,press"CLR"button to clear the data displayed on LCD screen.7.Power off automatically

The Car Paint Tester will power off automatically if two minutes no operation after start-up.And it will power off automatically as well after five minutes start-up,even when you are operating it.