The thickness gauge is used to measure the thickness of the plated and coated sheet on metal, e.g. paint/enamel/ chrome on steel, paint and anodizing coating on aluminum/copper. The gauge takes the precision integrated probe, and uses principles of electro-magnetic induction and the eddy current effect, which automatically detects the attribute of substrates.

Why choose VC-200 & 300?

Our items PK Other products

Metal probe VS Plastics probe
HD color digital screen VS Black and white screen
USB charging VS Battery powered

1. Menu operation and color-screen HD display.

2. Voice broadcast function.

3. Two measurement methods, single and continuous measurement.

4. The thickness measurement of the non-magnetic coating on the surface of the magnetic metal substrate and the thickness measurement of the non-metal coating on the non-magnetic metal substrate.

5. It has two calibration functions: basic and zero point.

6. Metric and English unit selection and storage function.

7. Screen rotation, charging protection, multiple interface display, screen brightness selection.

8. Automatic shutdown selection function.

Calibration Operation

1.Basic Calibration:
a.Prepare the calibration plate and calibration base,enter calibration menu and select basic calibration.
b.According to the instrument instruction,place the corresponding calibration plate for calibration.
c.After calibration is completed,"calibration complete"will show up at the bottom of the screen and the instrument will return to the previous interface.
d.After the calibration is complete,you can go back to measurement interface and perform measurement.
e.Magnetic and non-magnetic metal base calibration do not affect each other.

2.Zero Calibration:
a.Enter calibration menu and select zero calibration.
b.Lightly press the instrument onto substrate.
c.The instrument will automatically calibrate to zero point.
d.The instrument displays the previous interface after calibration is done.
e.After calibration is complete,you can go back to meansurement interface and perform measurements.

How to judge automobile paint?

The thickness of the original car paint is between 100-200um,but the thickness of the touch up paint will be clear.It may be 500-1000um or even thicker.
According to the standard of economical automobile,the paint surface of automobile should not be less than 90um,90um is regarded as cutting corners.
For any cars standard higher than USD50000,the paint surface shall not be lower than 120um(hard index).Below 120um is considered as cutting corners.

Details

Technical Specification

Packing list

1pc VC-200/300 coating thickness gauge
1pc English operation instruction
1pc Standard Aluminum
1pc Standard ferrous
1set Standard foil
1 pc USB cable
1pc packing box