Newest Lite Version Lexia3 PP2000 V25 Lexia-3 V48 For Citroen/for Peugeot Diagnostic Scanner Diagbox V7.83 Lexia Golden PCB

From Photo,Our Lexia Lite version have Golden Edge which cost higher price than others simple Green PCB. Also ours have Voltage protector and NEC Japan Relay which are all good quality and stable function.

Golden Edge cost more money than Simple gree PCB . Please Buy Golden PCB.

PCB Board Display:

Normal Chip Green PCB Board with Golden Edge,12pcs NEC Japan Relay,and PCB board has 2pcs Optocouplers

Lexia3 PP2000 Diagnostic Tool For Citroen&For Peugeot

Lite Version Normal Chip

Golden Edge Firmware 921815C Reference Serial

Description:

Dealer lexia3,PP2000 diagnostic scanner for comprehensive for Citroen and for Peugeot cars diagnostic. You can do all as a authorized dealer does.lexia3,PP2000 diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics lexia3,PP2000 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

For programming, diagbox support basic programming, but some programming like car alarm system need account username and password, we don't supply& haven't username and password, only for citroen and for peugeot center repair shop has username and password, please note it.

Highlights to Buy PP2000 Lite Version:

1.It supports for Citroen and for Peugeot

2.Newest Diagbox V7.83 with Multi-Language

3.PP2000 V25,Lexia3 V48

4.Firmware Version 921815C

5.Lite Version.Golden PCB Edge With 2pcs Optocouplers and 12pcs Janpan NEC Relay V4.5 more stable.

6.Cheaper Price and less weight .Only Device main unit and long usb cable.

7.It supports For Peugeot 307 now.

Advantage to Choose Lite Lexia3 Normal Chip:

1.Newest Most Stable Firmware 921815C Reference Serial

2.Normal Chip PCB Board With Gold Edge,12pcs New NEC Japan Relay,2pcs Optocouplers

3.Diagbox Version 7.83(If newer version come out ,we will replace it )

4.System Reuqirement: Win XP/Win 7 32Bits Only (PS:please must close anti-virus programmer,otherwise software file will delete)

5.Activation Password:Scary01

Language:

English, Chinese, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

Hardware and Software Requirements：

Software requires at least Intel Celeron / Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2 / 2000 / XP with the latest service pack installed.

Note:

Newest DiagBox V7.83 come out ,when you receive parcel please check CD .If any problem with CD,please feel free to contact me to send you download link.

CD have detail install steps video instruction ,please checking :)

Here we attach the CD software for Display ,it has Newest V7.83 Diagbox English Version:

After install Diagbox V7.02 to V7.76 completely,when upgrade to V7.82 ask password is Maitresox01

When V7.82 upgrade to V7.83,password Very Simple!

Tips:

1.Upgrade: If newer version come out ,Free Update New Version By Email or Weblink

2.Better Disconnect Internet when run software .

3.Do not update online,OR unit damaged

4.All passwords to upgrade DiagBox from 7.02 into 7.44 are Scary01.

Update Attention: please cut the file "C:AWRootbinfiAPPDIAG.SYS" out before update, and then click update package! after complete update please paste the cutted file back into the previous folder. which can avoid activating problem.

Attention For Diagbox Installation Tips:

1.Windows 7 32bit is the best choice,other system maybe some problems sometimes.

    So please choose windows 7 32bit

2.Need turn off the Internet conection,turn off the Antivirus software

3.All the steps of installing the Diagbox is in the "video for installation",Yes,all the steps,

  of course, we shortened the waiting time,to complete the installation of the Diagbox may take about

  three hours.Please be patient

4.The version 7.02 and version 7.57 is the most stable version,is the most perfect version.

  so if version 7.57 can  meet your requirements, you don't need to spend a lot of time to upgrade to higher version

Installation:

1.Run DTLite4454-0314,install Virtual drives

2.Load the file of DBV0702 into Virtual drives,and run Diagbox_setup,

  activated manually, complete the installation of Diagbox 7.01 and 7.02.

3.Updating

Update:

A.When you see "installed successfull",the version is 7.01,quit the software,

  then open Diagbox on the desktop,wait ,then 7.02

B.Quit the software, cut the file "APPDIAG.SYS" from C:AWRootbinfiAPPDIAG.SYS" 

  and store at other folder,then click update package to operate upgrading,

  After finsh updating, please cut back the file "APPDIAG.SYS"  into the previous folder.

  then restart the computer,,then open Diagbox on the desktop,,wait ,,then new version

C.Repeat step 2 when updatinge any package ,

  remember restart the computer,cut the file,cut back the file,every updating.

Upgrade Method:

Update Free by Email. If newer version come out ,we can send you download link to update .

(OEM Copy one ,please Disconnect internet when install software,otherwise device dameged and borken)

Update Attention:

please cut the file "C:AWRootbinfiAPPDIAG.SYS" out before update, and then click update package! after complete update please paste the cutted file back into the previous folder. which can avoid activating problem.

Supported Functions:

Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

Read fault codes

Displays all stored and pending fault codes with complete description,Program supports report printing or copy to clipboard.

Clear fault codes

This function clears all stored fault codes and other diagnostic information.

Measured Values

lexia 3 program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Temperature.

Actuator test

Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel or doors, cut off fuel, etc)

Programming Functions/Adaptatio

This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.

Package List:

1 x Main unit to 16Pin Connector

1 x Long 9pin to USB cable

1 x CD

Diagbox Newest Version V7.83

（Please Note: V7.82 and V7.83 only have English version patch ,if you want to upgrade those version ,please only set language to English ,otherwise it will fail installation error.）

Run Diagbox have Multi-Language ,please choose the language you need :

After choosed language,intstalling now

About Password:

From diagbox V7.01 to V7.66，Password Scary01

V7.82 Password: Maitresox01

V7.83 Password: Very Simple!

If you have any problem when installing softare ,please feel free to contact us ,we will send you instruction video to follow.