V2.3 Vgate vlinker MC/ Vgate iCar Pro Bluetooth 3.0/Bluetooth 4.0/Wifi OBD2 Scanner Wifi ELM327 For Android/IOS

Please note:

Please select the corresponding version according to your mobile phone system.

Vgate iCar Pro Features:

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning. (over 3000 generic code definitions in the database).

1. Clear trouble codes and turn off the MIL ("Check Engine" light)
2. Engine RPM
3. Calculated Load Valu
4. Coolant Temperature
5. Fuel System Status
6. Vehicle Speed
7. Short Term Fuel Trim
8. Long Term Fuel Trim
9. Intake Manifold Pressure
10. Timing Advance
11. Intake Air Temperature
12. Air Flow Rate
13.Absolute Throttle Position
14. Oxygen sensor voltages/associated short term fuel trims
15. Fuel System status
16. Fuel Pressure
17. Many othershellip

How to connect Vgate iCar Pro?

Please connect WIFI or Bluetooth directly in the software, do not connect on the phone's settings page. Otherwise, it cannot be connected. Here is the setup manual for icar pro.

Bimmercode for BMW-designated models :

Special function for BMW

For BMW 1 Series F20 F21
For BMW 2 Series F22 F23 F87
For BMW 2 Series Active Tourer F45
For BMW 2 Series Gran Tourer F64
For BMW 3 Series F30 F31 F34 F35 F80
For BMW 4 Series F32 F33 F36 F80 F83
For BMW 5 Series F07 F10 F11 F18 F90
For BMW 5 Series G30 G31
For BMW 6 Series F06 F12 F13
For BMW Series F01 F02 F03 F04
For BMW 6 Series G11
For BMW X1 F48
For BMW X2 F39
For BMW X3 F25 G01
For BMW X4 F26
For BMW X5 F15 F85
For BMW X6 F16 F86
For BMW i3 i8
For Mini F54 F55 F56 F57 F60

Vgate iCar Pro Special Features: Auto sleep mode and Ultra low power consumption

iCar Pro support all OBD II protocols, Auto Sleep Mode and Auto wake up Mode

Vgate iCar Pro supports all OBD II protocols:

1. SAE J1850 PWM (41.6 Kbaud)
2. SAE J1850 VPW (10.4 Kbaud)
3. ISO9141-2 (5 baud init, 10.4 Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
A. SAE J1939 CAN (29bit ID, 250 * Kbaud)
B. USER1 CAN (11 * bit ID, 125 * Kbaud)
C. USER2 CAN (11 * bit ID, 50 * kbaud)
* Default Settings (User Adjustable)

Vgate iCar Pro Easy to use:

Vgate iCar Pro Specification:

Supply Voltage: 11.5V-15V
Supply Current: <200Ma
Standby Current: <30Ma (TONWON Pro = <3Ma)
Operating temperature: -40 ℃ - 85 ℃
Operating Humidity: 5% - 95% RH Non-Dewfall
Hardware version：V2.2
Supported systems：Android/IOS
Connection method：Bluetooth-compatible
Vgate iCar Pro 3.0/4.0/WIFI

Vgate iCar Pro, How to Get the software ?

There is the software QR code in the manual paper, just Scan it to download the software :

Vgate iCar Pro Problem settlement:

Vgate iCar Pro Packing List

1 x Vgate iCar Pro
1 x User manual

---Vgate vLinker MC----

Vgate vLinker MC+ V2.3 Bluetooth 4.0/3.0/WIFI Version for BimmerCode FORScan For Android/IOS Scanner OBD 2 OBD2 Car Diagnostic Auto Tool PK OBDLINK

Why choose this vLinker MC+?

100% Original Vgate vLinker BT3.0/4.0/WIFI:

Compatible with 95%+ world car models.

1. Data buffer up to 2K bytes, UART baud rate increased to 230. 4 Kbpsc
2. Support Almost All ELM327/ELM329/OBDLINK Adapter Software
3. Automatic sleep and start to reduce power consumptione
4. OBD2 Standard Protocols+More protocols
5. Support user-defined commands
6. Request bytes up to 48 bytes
7. Support Firmware Update
8. Support user-defined APP
9.Support GMLAN and HS/MS-CAN (for Ford/GM)
10.15 ELM protocols/23 STN protocols/64 User-defined protocol

vLinker MC Support Protocols Multiple protocols：

--15 ELM format protocols;
-- 23 STN format protocols;
-- Up to 64 user-defined protocols.

vLinker MC OBDII 5 Standard protocols：

-- SAE J1850 VPW
-- SAE J1850 PWM
-- ISO 9141-2
-- ISO 14230-4
-- ISO 15765-4 CAN

vLinker MC Additional protocols：

-- SAE J1939 CAN
-- ISO 11898 (raw CAN)
-- for GMLAN Single Wire CAN (for GMW3089)
-- for Ford Medium Speed CAN (MS CAN)

These protocols cover almost 99% of the OBDII Cars on the market

Software Support：

Perfect compatibility: For Bimmer Code/For Torque/For Forscan/For JScan/For Auto Doctor/For OBD Fusion etc. 99% APP Software

Please note: We only sell adapters. If you need to charge for some functions of the software you choose, the fee will be paid to the software developer, not to us.

Rich instruction set, compatible with more APP software：

-- Fully compatible with ELM's AT command set;

-- Fully compatible with STN's ST command set;

-- Expanded 7 AT commands for HS-CAN, MS-CAN, SW-CAN;

--39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.

-- Compatible with ELM and STN power management solutions.

-- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep;

-- Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode.

-- Device sleep power consumption is less than 2 mA.

-- OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication.

-- UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.

-- 256-byte storage unit

-- More than 100,000 erasable times

-- Read and write operations on any unit in the storage area by using the VT command

-- Mix ID Sending" mode of CAN protocol.

-- Optional formatted send data according to protocol

-- Multiple WM sequence settings

-- Support AT command to manually set WM sequence

-- Support for specifying a protocol or a full protocol-wide temporary WM sequence

-- Support for a permanent link between a protocol and a private WM sequence

-- Secure bootloader for easy firmware updates

Vlinker MC Typical Applications：

• Vehicle telematics
• Fleet management and tracking applications
• Usage-based insurance (UBI)
• OBD data loggers
• Automotive diagnostic scan tools and code readers
• Digital dashboards

vLinker MC Special Function:

1. Fully automatic identification of vehicle protocols,quick reading of vehicle information.

2. Fully automatic standby/start,no manual switch button required.

Vgate Vlinker MC Package List

1 x Vgate vLinker WIFI/BT3.0/BT4.0

1 x User manual