Multiple protocols锛?/span>

--15 ELM format protocols;

-- 23 STN format protocols;

-- Up to 64 user-defined protocols.

OBDII 5 standard protocols锛?/span>

-- SAE J1850 VPW

-- SAE J1850 PWM

-- ISO 9141-2

-- ISO 14230-4

-- ISO 15765-4 CAN

Additional protocols锛?/span>

-- SAE J1939 CAN

-- ISO 11898 (raw CAN)

-- for GMLAN Single Wire CAN

-- for Ford Medium Speed CAN (MS CAN)

These protocols cover almost 99% of the OBDII Cars on the marketSoftware Support锛?/span>

Perfect compatibility: For Bimmer Code/For Torque/For Forscan/For JScan/For Auto Doctor/For OBD Fusion etc. 99% APP Software

Please Note锛?/strong>

We only sell adapters. If you need to charge for some functions of the software you choose, this money is paid to the software developer锛宯ot聽to usRich instruction set, compatible with more APP software锛?/span>

-- Fully compatible with ELM's AT command set;

-- Fully compatible with STN's ST command set;

-- Expanded 7 AT commands for HS-CAN, MS-CAN, SW-CAN;

--39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.

-- Compatible with ELM and STN power management solutions.

-- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep;

-- Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode.

-- Device sleep power consumption is less than 2 mA.

--聽OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication.

--聽UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.

-- 256-byte storage unit

-- More than 100,000 erasable times

-- Read and write operations on any unit in the storage area by using the VT command

--聽Mix ID Sending" mode of CAN protocol.

-- Optional formatted send data according to protocol

--聽Multiple WM sequence settings

-- Support AT command to manually set WM sequence

-- Support for specifying a protocol or a full protocol-wide temporary WM sequence

-- Support for a permanent link between a protocol and a private WM sequence

--聽Secure bootloader for easy firmware updates

Typical Applications锛?/span>

鈥?Vehicle telematics

鈥?Fleet management and tracking applications

鈥?Usage-based insurance (UBI)

鈥?OBD data loggers

鈥?Automotive diagnostic scan tools and code readers

鈥?Digital dashboards

Special Function:

Fully automatic identification of vehicle protocols,quick reading of vehicle information

Fully automatic standby/start,no manual switch button required

Connection method:

BT4.0/3.0锛?/span>

1.Turn on theIgnition in the car

2.Plug in the adapterinto the OBD Port

3.Turn on Wireless , It only needs to be turned on

4.Open OBD Auto Doctor choose 鈥淓xtras鈥?锛宑ick 鈥淐onnectivity鈥?choose wireless and聽 鈥渧Linker MC+鈥?Drop out software and Enter again

WIFI锛?/span>

1.Turn on theIgnition in the car

2.Plug in the adapterinto the OBD Port

3.Turn on WIFI,connected 鈥渧Linker鈥?/strong>

4.Open OBD Auto Doctor choose 鈥淓xtras鈥?锛宑ick 鈥淐onnectivity鈥?choose 鈥淲IFI鈥濓紝Drop out software and Enter again

1 x Vgate vLinker WIFI/BT3.0/BT4.0

1 x User manual