Item specifics
-
Certification
CE
-
Origin
CN(Origin)
-
Software Version
New
-
Language
English
-
Software Update
Yes
-
Hardware Version
New
-
Item Type
Code Readers & Scan Tools
-
Quality
Top
-
Product Name
Vgate vLinker MC+
-
Car Maker
For VW For Toyota For BMW For Benz
-
Operating system For BT4.0/WIFI
Android/ios
-
Function
More Powerful Than ELM327 V1.5
-
Operating system For BT3.0
Android
-
Warranty
3 years
-
Shipping
Timely
How to choose ? Type 1:vlink BT V3.0,Support Android Type 2:vlink BT V4.0,Support Android and IOS Type 1:vlink Wifi ,Support Android and IOS Vgate vLinker MC+ ELM 327 V2.2 Bluetooth-compatible 4.0 WIFI ELM327 For Android/IOS Scanner OBD 2 OBD2 Car Diagnostic Auto Tool PK OBDLINK Purchase Notes: 1.Our software to test if is origina Vgate, if you need you can contact us,Avoid getting fake Vgate from other stores 2.If you use Bluetooth-compatible 4.0 to Connected, please connect directly in the diagnostic APP
Why choose this vLink MC+? 100% Original Vgate vLinker BT3.0/4.0/WIFI: compatible with 95%+ world car models.
1.Data buffer up to 2K bytes, UART baud rate increased to 230. 4 Kbpsc 2.Support Almost All ELM327/ELM329/OBDLINK Adapter Software 3.Automatic sleep and start to reduce power consumptione 4.OBD2 Standard Protocols+More protocols 5.Support user-defined commands 6.Request bytes up to 48 bytes 7.Support Firmware Update 8.Support user-defined APP
Support Protocols Multiple protocols: --15 ELM format protocols; -- 23 STN format protocols; -- Up to 64 user-defined protocols. OBDII 5 standard protocols: -- SAE J1850 VPW -- SAE J1850 PWM -- ISO 9141-2 -- ISO 14230-4 -- ISO 15765-4 CAN Additionalprotocols: -- SAE J1939 CAN -- ISO 11898 (raw CAN) -- for GMLAN Single Wire CAN (for GMW3089) -- for Ford Medium Speed CAN (MS CAN) Theseprotocolscover almost 99% of the OBDII Cars on the market
Software Support: Perfect compatibility: For Bimmer Code/For Torque/For Forscan/For JScan/For Auto Doctor/For OBD Fusion etc. 99% APP Software Please Note: We only sell adapters. If you need to charge for some functions of the software you choose, this money is paid to the software developer,not to us Rich instruction set, compatible with more APP software: -- Fully compatible with ELM's AT command set; -- Fully compatible with STN's ST command set; -- Expanded 7 AT commands for HS-CAN, MS-CAN, SW-CAN; --39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps. -- Compatible with ELM and STN power management solutions. -- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep; -- Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode. -- Device sleep power consumption is less than 2 mA. -- OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication. -- UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps. -- 256-byte storage unit -- More than 100,000 erasable times -- Read and write operations on any unit in the storage area by using the VT command -- Mix ID Sending" mode of CAN protocol. -- Optional formatted send data according to protocol -- Multiple WM sequence settings -- Support AT command to manually set WM sequence -- Support for specifying a protocol or a full protocol-wide temporary WM sequence -- Support for a permanent link between a protocol and a private WM sequence -- Secure bootloader for easy firmware updates Typical Applications: • Vehicle telematics • Fleet management and tracking applications • Usage-based insurance (UBI) • OBD data loggers • Automotive diagnostic scan tools and code readers • Digital dashboards Special Function: 1.Fully automatic identification of vehicle protocols,quick reading of vehicle information 2.Fully automatic standby/start,no manual switch button required Connection method: How to install the BT4.0/3.0(type 4 and type 5)? 1.Turn on theIgnition in the car 2.Plug in the adapterinto the OBD Port 3.Turn on Bluetooth-compatible,Bluetooth-compatible only needs to be turned on 4.Open OBD Auto Doctor choose “Extras” ,cick “Connectivity”,choose ”and “vLinker MC+” Drop out software and Enter again How to install the Wifi (type 3)? 1.Turn on theIgnition in the car 2.Plug in the adapterinto the OBD Port 3.Turn on WIFI,connected “vLinker” 4.Open OBD Auto Doctor choose “Extras” ,cick “Connectivity”,choose “WIFI”,Drop out software and Enter again Package List: 1 x Vgate vLinker WIFI/BT3.0/BT4.0 1 x User manual
|