WURTH 250 ML RADIATOR CLEANER

Suitable for all engines

Cooling system of the corrosion and mud deposits addresses

Clean cooling system through the high working reliability.

The remains of lime neutralize the

New cooling liquid due to the remains of old dirt contamination.

Compatible with antifreeze

Alkaline, pH range 9-11

Compatible with all the ingredients used in the construction of radiator.

Cooling circuit remains of addresses and cooling system. For example, oil kalıntılarının cylinder kapaklarında caused faults is resolved. Radiator cleaner as measure each cooling fluid change can be used. 10 liter for cooling water 250 ml is enough.

Not

Cleansing ingredient, not suitable for public transport. Instructions for use, yürüttüğümüz testlere and experience is based on; Each application prior to their testlerinizi. A large number of application, storage and processing koşulundan due to do accept responsibility for the result of a particular application. Customer service technical knowledge who provides to the degree that act as an advisory service; Provided advice or service, specific, the contractual agreement as varılmış to come into the scope of our service or couse deliberately behave outside this service due to liability are not accepted. Guarantee the continuity of the quality of our products. Technical changes making and products more development reserve the right.

Use area

Radiator repairs and cooling system maintenance work decreasing during cooling performance to fix.

Guide

Box contents into the cooling water. Heater valves. Motor, about 30 minutes at run. Radiator cleaning agent with deposits of soluble water being clean. With water cleaning process, the thermostat çıkartmadan yapılabilir. Expansion tank and water hoses oil from the affected parts recommended. Cleaning, air after receiving and leak check cooling system re-fill.

Content:250 ml

Color:Yellow

Fragrance/room fragrance:Light

Chemical base:Water

Density:1,023g/cm³

Density conditions20 ° c

Production from the shelf life24 month

Use Shape

Radiator onarımlarından and cooling system maintenance affairs to give power to cooling after used. Box contents into the cooling water stir. Heating button warm position. Motor operating temperature around 30 minute working condition. Radiator cleaner is resolved through kalıntılar durulanarak cleaned. Rinsing process is done without dismantling the thermostat. Age by spill affected cooling water is recommended to replace the pieces such as hoppers and water hoses. Cooling system after cleaning system re-fill water, bleed and check tightness. 250 ml additive 10 liter is enough for cooling water