XPROG V6.26 V6.17 V6.12 V6.50 V5.55 X-PROG M Metal Box Xprog V5.86 XPROG-M ECU Programmer Tool X-Prog M Box V6.12 Full Adapters

Good News:

XPROG V6.26 and V6.50 Added Orange5 V1.36 V850E2.

(If you need to see the full functionality, please contact customer service after purchase.)

Newest XPROG V6.12/V6.17 Description:

New Xprog 6.12 ELDB V6.12 XPELDB V6.12 more functions than old version

Xprog 6.12 ELDB V6.12 ECU Chip Tuning Tool With USB Dongle

Top 5  Reasons to Get Newest XPROG V6.12:

• 
  

• 
  New Generation Hardware, runs more steady and faster than old version.
  

• 
  

• 
  Latest software version: V6.12
  

• 
  

• 
  Add new authorization: AUTH-0028-3 Renesas RL78 Authorized and AUTH-0028-4 Renesas M32C Authorized
  

• 
  

• 
  Language: English 
  

• 
  

• 
  Operating system: WinXP/Win7/Win8
  

XPROG V6.12 using tips:

1. XPROG V6.12 dongle isn't compatible with older version Xprog.

2. Please Close all anti-virus software in your computer, becase the anti-virus software will kill Xprog V6.12 driver.

3. Disconnect internet. If not, the internet may damage XPROG hardware.

4. Uninstall all the old version XPROG software before you install V6.12 software, because XPROG V6.12 hardware is not compatible with other version XPROG software.

5. Never try to UPDATE it, the hardware will be damaged if you try to update it online.

Install Notice:

Please windows system required as below:

1. Windows system should be windows XP 32bit OR windows 7 64 bit, all the patch software for the windows system should be installed already and the windows properly works well...

2. The windows system should be with at lest 2 partitions (except the CD ROM.)

3. Can not be working with virtual harddisk.

Install manual in words:

1. Click the file "installation.reg", get the file information to the regedit.

2. Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwise the Xprog software will not start.

3. Plug the Xprog main interface to the computer, install the USB driver.

4. Copy the folder "XPROG-BOX6.12" to the desktop, and open it, and run the "xprogdesktop.exe", then software open.

XPROG V6.12 Authorizations:

AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)

AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)

AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)

AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)

AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)

AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.

AUTH-0008 BMW EWS3 authorization

AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)

AUTH-0010 MB ZGS001 authorization

AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)

AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)

AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)

AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)

AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)

AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).

AUTH-0023-1 MAC7xxx

AUTH-0023-2 XC23xx

AUTH-0024-1 MC9S12Cxx

AUTH-0024-2 MC9S12XE

AUTH-0024-3 9S12XE SECURITY

AUTH-0024-4 MC9S12HA/HY/P

AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13

AUTH-0027-1 HC(S)908 update Authorized 2016/3/13

AUTH-0027-2 HC(S)908 sercurity Authorized 2016/3/13

AUTH-0028-1 Renesas V850 Authorized 2017/10/9

AUTH-0028-2 Renesas SuperH Authorized 2017/10/9

AUTH-0028-3 Renesas RL78 Authorized  ---New!

AUTH-0028-4 Renesas M32C Authorized ---New!

XPROG-M V6.12 Adapters:

ADP-0019 Rev.B ----New!

ADP-0006 M35080 ICP adapter ---New!

QFP64 MC908AZ/AS60 3K85K adapter ---New!

QO18S714 ---New!

ADP-0001 TMS370 PLCC28 programming adapter

ADP-0002 TMS370 PLCC44 programming adapter

ADP-0003 TMS370 PLCC68 programming adapter

ADP-0004 Motorola HC05B/X PLCC52 programming adapter

ADP-0005 Motorola HC05B/X QFP64 programming adapter

ADP-0006 ST M35080 in-circuit programming adapter

ADP-0008 TMS374 family in-circuit programming adapter

ADP-0009 MC68HC05V12 programming adapter

ADP-0010 TMS374 on-board programming adapter

ADP-0011 HC11EA9/E9 programming adapter

ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter

Additional adaptor for 5M48H P-Flash

ADP-0019 Rev.A

EWS3 adaptor

EEPROM adaptor

QFP28 adaptor

QFP64 adaptor

QFP80 adaptor

QFP112 adaptor

QFP144 adaptor

Package Includes:

1pc  x  XPROG-Box Hardware (Aluminum Enclosure)

19pc x  Adapters Set

1pc  x  USB Cable

1pc  x 16Pin cable

1pc  x  CD with XPROG-Box Software (V6.12)

Please Pay Attention for V5.84 Installation Tips:

Before install V5.84,please make sure MUST uninstall all old version xprog driver and software.

If customer doesn't uninstall old xprog, once plug V5.84 to PC, the device authorization will lose and hardware will be damaged . Only send back for repair, it will waste too much time .

CD have video instruction, please follow it and install. Thank you very much in advance.

Everytime before run V5.84 software ,please MUST CLICK 5.84Registry File .So it can avoid lose certificate.

Please MUST click this before run V5.84 software

PS:  if buyer meet software message shows "Waiting Certificate" that means you did not run software correct, Certificate already lost.It only flash IC Chip or send back for repair .So please Must pay attention to it.

Here is error photo:

Some buyer did not run software and click update in wrong operation makes device no working shows "Device is Silent",certificate lost.

Here is error shows:

It requires to buy ATMEGA64A Chip to replace and solder,please check below photo:

XPROG M V5.55 Full AdaptersBlack Metal Box

Auto ECU Programming

Highlight of XPROG 5.55:

New and Old 8 SOIC CLIP CHIP

Description：

Clip for Xprog V5.60/5.84/5.86/6.12 XPROG-Box ECU Programmer reading 8pin chip without removing.
Also this clip adapter can work with UPA USB Programmer.

Package includes:

1 x 8 Soic Clip Adapter

New 8 Soic Clip:

New Addition:

Work with VVDI Prog/CG Pro 9S12/Orange5/iProg+ /UPA USB Programmer

XPROG V5.86:

Old 8 Soic Clip: